Open Gear Wire Rope Chain Lubricant - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Open Gear Wire Rope Chain Lubricant from Aerosol Solutions is designed for industrial and heavy-duty applications, providing long-lasting protection and improved durability for gears, chains, and wire ropes. Its deep-penetrating formula creates a protective coating that resists moisture and reduces wear, extending equipment life. A key benefit is its ability to maintain performance in demanding environments, though users should be mindful of proper ventilation during application.
All features
| Model Part Number | ASO0407 |
|---|---|
| Brand | Aerosol Solutions |
Extended Product Information
FAQs
How often should I apply this lubricant?
Frequency depends on the operating conditions and exposure. For heavily used or exposed equipment, reapplication every 1-3 months is common. Monitor the equipment for signs of wear or dryness and adjust as needed.
Can this lubricant be used on bicycle chains?
While it provides lubrication, this product is specifically formulated for heavy-duty industrial applications. For bicycle chains, a dedicated bicycle chain lubricant would be more appropriate for optimal performance and cleanliness.
What is the operating temperature range?
Specific temperature range data is not provided, but it is designed for heavy-duty industrial use, suggesting it can withstand a wide range of typical operating temperatures. Avoid application near extreme heat sources.
How does the moisture-resistant formula work?
The formula contains additives that repel water, creating a barrier on the surface of the metal. This prevents moisture from reaching the metal, thus reducing the risk of rust and corrosion.
Is this product environmentally friendly?
While designed for industrial longevity, disposal of aerosol cans should follow local environmental guidelines. Specific environmental impact data is not detailed in the product description.
Can I use this on indoor chains?
Yes, it can be used on indoor chains, but ensure the area is well-ventilated during application due to the aerosol nature and potential for odor.
Troubleshooting
Nozzle is clogged or not spraying.
Turn the can upside down and spray briefly to clear the nozzle. If still clogged, remove the nozzle (if possible) and soak it in a suitable solvent, then dry thoroughly before reattaching.
Lubricant is dripping excessively.
Ensure the product was applied evenly and not in overly thick coats. Wipe away any excess lubricant immediately after application. Allow it time to set; viscosity may increase as propellant evaporates.
Product is not penetrating effectively.
Ensure the surface is clean and free from heavy build-up. Shake the can more thoroughly before use. Apply a lighter, more even coat and allow time for penetration.
Strong odor during application.
This is normal due to the solvents in the formula. Ensure the application area is well-ventilated or wear appropriate respiratory protection.
Pros and Cons
Pros
- Provides excellent long-term lubrication and protection.
- Effectively reduces wear and prevents corrosion.
- Suitable for demanding industrial environments.
- Deep penetration ensures thorough coverage.
- Moisture-resistant formula enhances durability.
Cons
- Requires adequate ventilation during use due to aerosol nature.
- May require specialized application tools for optimal reach in complex machinery.
- Not intended for use on electronics or sensitive components.
Setup, Compatibility & Care
Setup:
- Ensure the targeted surface (gear, chain, or wire rope) is clean and free from debris, rust, or old grease. For best results, clean heavily soiled areas before application.
- Shake the can vigorously for at least one minute before use.
- Hold the can upright and spray from a distance of 15-25 cm (6-10 inches).
- Apply a consistent, even coat. For internal components, use the provided extension tube if applicable.
Compatibility:
This lubricant is specifically designed for open gears, wire ropes, and chains in industrial and heavy-duty applications. It is not recommended for use on electrical components, sensitive plastics, or painted surfaces where overspray might occur. Always test on an inconspicuous area if unsure about compatibility with specific materials.
Care:
Store the can in a cool, dry place away from direct sunlight and heat sources. After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging. Dispose of empty cans responsibly according to local regulations.