Everbuild Stick 2 Rapid Epoxy Syringe Adhesive Glue - 24ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a fast-setting, industrial-strength adhesive for various materials. The Everbuild Stick 2 Rapid Epoxy offers a strong bond in just 4 minutes, making it ideal for quick repairs. However, it's important to note that the bond is permanent, so careful alignment is essential before curing. This guide covers key features, usage instructions, troubleshooting, and FAQs to help you get the most out of your Everbuild Stick 2 Rapid Epoxy.
All features
| Model Part Number | S2RAPEX24 |
|---|---|
| Brand | Everbuild |
Extended Product Information
FAQs
How long does it take for the epoxy to fully cure?
The adhesive sets hard in 4 minutes, but full cure may take up to 24 hours. Check product packaging for precise curing times.
Can I use this on flexible plastics?
The Everbuild Stick 2 Rapid Epoxy is not recommended for use on flexible plastics.
Can I paint over the cured epoxy?
Yes, once the epoxy is fully cured, it can be painted, sanded, and drilled.
How should I store the Everbuild Stick 2 Rapid Epoxy?
Store in a cool, dry place away from direct sunlight.
What should I do if the epoxy gets on my skin?
Clean the affected area immediately with soap and water. If irritation persists, seek medical advice.
Is this adhesive suitable for outdoor use?
Yes, once cured, the adhesive is durable and suitable for outdoor use.
Can I use this on food-contact surfaces?
The product is not specified for use on food-contact surfaces.
Troubleshooting
Adhesive isn't setting.
Ensure you mixed the two parts of the epoxy thoroughly. Check the expiration date. Inadequate mixing or expired product could be the issue.
Bond failed.
Make sure surfaces were cleaned properly. Ensure surfaces were held together firmly during the curing process. Verify the materials are compatible with the epoxy.
Syringe is difficult to dispense.
Ensure the nozzle is clear of obstructions. If the product is cold, try warming it slightly (not directly over a heat source) to improve flow.
Pros and Cons
Pros
- Fast setting time saves time and allows for immediate use.
- Bonds to a wide range of materials, making it highly versatile.
- Provides a strong and durable bond for long-lasting repairs.
- The syringe design allows for controlled and accurate application.
- Once cured, it can be finished for a professional look.
Cons
- The bond is permanent, so alignment must be precise before curing.
- Limited working time due to rapid setting can be challenging for complex projects.
- Not suitable for use on flexible plastics that may flex.
- May require ventilation when used in enclosed spaces due to strong fumes.
Setup, Compatibility & Care
Setup:
- Clean the surfaces to be bonded, ensuring they are free from dirt, oil, and grease.
- Dispense equal amounts of both parts of the epoxy from the syringe.
- Mix the two parts thoroughly until a consistent color is achieved.
- Apply the mixture to one or both surfaces.
- Join the surfaces and hold them firmly together for approximately 4 minutes.
- Allow the epoxy to fully cure according to the package instructions before applying stress.
Compatibility:
- Compatible with metals, crockery, glass, wood, concrete, rubber, fabrics, crystal, jewellery, and hard plastics.
- Test on a small, inconspicuous area first, especially with delicate materials.
Care:
- Store in a cool, dry place.
- Avoid direct sunlight.
- Clean up any spills immediately with a suitable solvent before the epoxy cures.
- Dispose of used materials according to local regulations.