Outdoor Rated Speakers - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These 2-way, weatherproof compact background speakers in black are designed for outdoor or high-moisture environments like gardens, patios, or spa areas. Their key benefit is durable, versatile audio performance that can handle the elements, but a caveat is that they are sold in pairs, and individual or multi-speaker purchases may require separate listings. They feature a 6.5" PP cone driver, a rotary selector for 100V line tappings (5W, 10W, 20W, 40W) or 8 Ohm operation (60W RMS, 120W Max), and an IP54 weatherproof rating.
All features
| Colour | Black |
|---|---|
| Brand | Loops |
Extended Product Information
FAQs
Are these speakers sold individually?
This listing is for a pair (2 speakers). They can often be purchased individually or in greater quantities through other listings from the same seller.
Can I use these with a standard home stereo system?
Yes, you can use them with a standard home stereo (8 Ohm) system. Ensure the rotary switch on the back of the speaker is set to the '8 OHM' position and that your amplifier can handle the 60W RMS power rating.
What does IP54 rating mean?
An IP54 rating means the speaker is protected against dust ingress and splashing water from any direction. It is suitable for outdoor use but not for submersion.
How do I choose the correct 100V tapping?
The tapping you choose (5W, 10W, 20W, 40W) determines the power the speaker will draw from a 100V amplifier. Select a tapping that is less than or equal to your amplifier's total power capacity divided by the number of speakers. For example, with a 120W amplifier and 4 speakers, you might use the 20W tapping on each (4 x 20W = 80W, leaving headroom).
What is the difference between 100V and 8 Ohm systems?
An 8 Ohm system uses a standard low-voltage, high-current design common in home audio. A 100V system uses a transformer to step up voltage and reduce current, allowing multiple speakers to be connected in parallel over long distances with minimal signal loss. The rotary switch allows these speakers to function in either type of system.
What is the length of the attached speaker cable?
Each speaker comes with a 1-meter hard-wired speaker cable attached to the rear.
Can I paint these speakers?
While not explicitly recommended, if you choose to paint them, use a spray paint designed for plastic and apply it lightly. Ensure the paint does not clog the speaker grille or affect the driver.
Troubleshooting
No sound from the speaker
Verify the speaker cable is securely connected to the amplifier. Ensure the rotary switch is set correctly to either 8 Ohms or the appropriate 100V tapping. Check that the amplifier is powered on and the volume is turned up. Test with another speaker or source to isolate the issue.
Distorted or poor sound quality
Ensure the speaker is not being overdriven; check the amplifier's output wattage against the speaker's RMS rating. Confirm the rotary switch is firmly set in position and not between settings. Check the speaker cable for any damage.
Speaker crackles or pops
This can indicate a loose connection. Re-check all cable connections at both the speaker and amplifier. If using a 100V system, ensure the correct wattage tapping is selected and that the amplifier's 100V output is stable.
Uneven volume across multiple speakers (100V system)
Adjust the wattage tapping on each speaker to achieve desired balance. Ensure all speakers are wired in parallel correctly to the 100V line.
Pros and Cons
Pros
- Durable and weatherproof design for outdoor installations.
- Flexible compatibility with both 100V and 8 Ohm systems.
- Easy to install with included mounting bracket.
- Suitable for a variety of environments, including gardens, patios, and commercial spaces.
Cons
- Sold as a pair, may need to purchase multiple pairs for larger setups.
- Requires careful setting of the rotary switch for correct impedance matching.
- Background speaker, not intended for high-fidelity primary sound systems.
- 1-meter cable length may be limiting for some installations.
Setup, Compatibility & Care
Setup: Mount the speakers securely using the included bracket, ensuring they are angled to cover the desired listening area. For 100V systems, connect the desired wattage tapping from the speaker cable to the corresponding tap on the amplifier. For 8 Ohm systems, connect the speaker cable directly to the 8 Ohm output terminal on your amplifier. **Crucially, set the rotary selector switch on the rear of the speaker to either the correct 100V tapping or the 8 Ohm setting *before* connecting power.** Incorrect settings can damage the speaker or amplifier.
Compatibility: These speakers are compatible with standard Hi-Fi amplifiers when set to 8 Ohms, provided the amplifier can handle the 60W RMS power rating. They are also designed for 100V line systems, common in commercial installations, with selectable tappings from 5W to 40W.
Care: Clean the speaker cabinets with a slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the speaker grille is free of debris that could impede sound. While weatherproof, prolonged direct exposure to extreme weather conditions should be minimized for longevity.