Bond It Contact Adhesive - Beige, 500Ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users effectively utilize Bond It Contact Adhesive. Ideal for bonding various materials like wood, metal, and plastics, it provides a strong, durable bond. Note that it's not suitable for all materials, such as polystyrene and certain plastics. This guide will cover features, uses, and troubleshooting to help you achieve the best results.
All features
| Colour | Beige |
|---|---|
| Model Part Number | BDA001 |
| Brand | Bond it |
Extended Product Information
FAQs
What is the coverage of Bond It Contact Adhesive?
Coverage depends on the surface texture and application method. A thin, even coating will provide the best results and maximize coverage.
Can I use this adhesive on painted surfaces?
The solvent in the contact adhesive may attack certain painted or lacquered surfaces. Always test in an inconspicuous area first.
How long is the open time?
The open time is approximately 5-30 minutes, depending on the environmental conditions. Bonding should occur within this timeframe for the best results.
What should I do if the open time is exceeded?
If the open time is exceeded, re-apply the adhesive to both surfaces and allow it to dry again before bonding.
How do I clean up the adhesive?
Clean tools and spills immediately with a suitable solvent.
Is this adhesive suitable for outdoor use?
It can be used externally when the adhesive is protected from direct sunlight and water.
What safety precautions should I take?
Ensure adequate ventilation during application. Avoid contact with skin and eyes. Refer to the product's safety data sheet for detailed information.
Troubleshooting
Bond not holding
Ensure both surfaces were clean and properly prepared. Check if the adhesive was allowed to dry to a touch-dry state before bonding. Re-apply if necessary.
Adhesive appears grey or has a bloom
This indicates condensation. Delay bonding until the glue is moisture-free. Ensure the work environment is not too damp.
Adhesive is too thick
Ensure the adhesive has been stirred correctly. If the product is old, it may have thickened and should be discarded.
Pros and Cons
Pros
- Strong and durable bond.
- Versatile use on multiple materials.
- Toluene-free formula, improving safety.
- Suitable for both interior and exterior applications (when protected).
- Easy to apply using common tools.
Cons
- Not suitable for use with polystyrene, polythene, and similar materials.
- May attack certain painted or lacquered surfaces.
- Open time requires careful monitoring to ensure proper bonding.
- Requires proper ventilation when applying.
Setup, Compatibility & Care
Setup
- Preparation: Ensure surfaces are clean, dry, and free from dust, grease, or other contaminants.
- Application: Stir the adhesive thoroughly until a uniform consistency is obtained. Apply a thin, even layer to both surfaces using a notched scraper, brush, or trowel.
- Drying: Allow the adhesive to become touch dry (approximately 5-30 minutes), depending on environmental conditions.
- Bonding: Carefully align the surfaces and press them firmly together.
Compatibility
Bond It Contact Adhesive is compatible with:
- Cork
- Leather
- Rubber
- Metals
- Wood
- Chipboard
- Hardboard
- Laminated plastics (e.g., Formica)
- Dense textiles
- Plaster
- Stone
- Concrete
- Cementitious Screeds
It is not compatible with:
- Polystyrene
- Polythene
- Polypropylene
- Silicone rubbers
- Bitumen
- PTFE
Care
- Store in a cool, dry place.
- Keep away from direct sunlight and heat sources.
- Ensure proper ventilation during application and drying.
- Clean tools immediately after use with a suitable solvent.