Air Pro Oil-Filled Electric Radiator - 2500W

POWERFUL 2500W HEATING: Warm rooms up to 30m² with fast, consistent heat. Three power levels (1000...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Air Pro Oil-Filled Electric Radiator is designed for homeowners seeking efficient and quiet heating for medium to large rooms up to 30m². Its key benefit is providing consistent, long-lasting warmth with advanced safety features, though its 2500W maximum power means it requires a robust electrical circuit.

All features

Model Part Number2500W
BrandAir Pro

Extended Product Information

FAQs

How long does it take for the oil-filled radiator to heat a room?

Oil-filled radiators provide radiant heat and take longer to warm up compared to fan heaters. It typically takes 20-30 minutes to feel a noticeable difference in room temperature, with full warmth achieved over a longer period, providing sustained heat.

Is the oil inside the radiator dangerous if it leaks?

The oil is permanently sealed within the unit and is non-toxic. In the unlikely event of a leak, unplug the heater immediately, allow it to cool, and contact customer support for assistance. Avoid using the heater if a leak is detected.

Can I use this heater in a bathroom?

This heater is not designed for use in bathrooms or other high-humidity environments. It should be used in dry, indoor locations only, placed on a level surface and away from water sources.

What is the power consumption of this heater?

The heater has three power settings: 1000W, 1500W, and 2500W. The actual power consumption will depend on the setting you choose and the thermostat's operation.

How do I adjust the thermostat?

The thermostat control knob allows you to set your desired room temperature. Turn the knob clockwise to increase the temperature and counter-clockwise to decrease it. The heater will cycle on and off to maintain the set temperature.

What should I do if the heater smells unusual?

A slight new-appliance smell may be noticeable during the first few uses, which should dissipate. If a strong or burning smell occurs, unplug the heater immediately, ensure nothing is obstructing its vents, and contact customer support.

Troubleshooting

Heater not turning on

Ensure the power cord is securely plugged into a working electrical outlet. Check if the tip-over switch has been activated; if so, return the unit to an upright position and allow it to stabilize. Verify that the power outlet is functioning by testing it with another appliance.

Heater is not producing heat

Confirm that the heater is switched on and set to a desired power level and thermostat setting. Check if the overheat protection has engaged; if so, unplug the unit, allow it to cool for 15-20 minutes, ensure ventilation is not blocked, and then try again.

Weak or inconsistent heating

Ensure the thermostat is set to a temperature higher than the current room temperature. Check that the chosen power level is sufficient for the room size. Make sure the heater is placed in an open area and not obstructed, allowing for proper air circulation.

Unusual noise during operation

Some minor clicking or popping sounds may occur as the oil heats and expands, which is normal. However, if the noise is loud or persistent, unplug the heater and contact customer support.

Pros and Cons

Pros

  • Effective for heating medium to large rooms.
  • Quiet operation, suitable for noise-sensitive environments.
  • Multiple power settings and adjustable thermostat for customized comfort.
  • Safety features like overheat protection and tip-over switch enhance user security.
  • Easy to move and store due to portability features.

Cons

  • High power consumption (2500W maximum) may impact electricity bills.
  • Takes time to heat up a room compared to fan heaters.
  • Requires a dedicated or strong electrical circuit to operate at maximum power.
  • Cord length (1.5m) might limit placement options in larger rooms.

Setup, Compatibility & Care

Setup:

  1. Unpack the radiator and ensure all packaging is removed.
  2. Attach the 360° castor wheels to the base as per the included instructions.
  3. Place the radiator on a flat, stable, and heat-resistant surface, away from flammable materials.
  4. Ensure the power cord is fully untangled and plugged directly into a suitable wall socket.

Compatibility:

  • This heater is designed for standard household electrical outlets.
  • Due to its 2500W maximum power rating, it is recommended to plug it into a circuit that can support this load without overloading, especially when using other high-power appliances on the same circuit.

Care:

  • Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
  • Storage: When not in use, store the heater in a cool, dry place. Use the integrated cable tidy to wrap the power cord neatly. Ensure the unit is fully cooled and dry before storing.