Tascam Interface Card - IF-MA64-BNMADI
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Tascam IF-MA64-BNMADI Interface Card is designed for users of the Tascam DA-6400 and DA-6400DP recorders seeking to integrate professional-grade MADI audio networking via BNC coax connections. It expands your existing setup by enabling streamlined audio routing and connectivity. A key benefit is its ability to add MADI I/O to your Tascam backup recorder, though it notably lacks the 'through' input found on other models.
All features
| Model Part Number | IF-MA64-BNMADI |
|---|---|
| Brand | Tascam |
Extended Product Information
FAQs
What is MADI and why is it used?
MADI (Multichannel Audio Digital Interface) is a standard for transmitting a large number of digital audio channels over a single coaxial or optical cable. It's used in professional audio for its efficiency in handling multiple audio streams, reducing cable complexity.
What is the difference between IF-MA64-BNMADI and IF-MA64/EX?
The IF-MA64-BNMADI uses BNC connectors for MADI and does not have a 'through' input. The IF-MA64/EX also uses BNC connectors but includes an additional 'through' BNC input, offering slightly different connectivity options.
Can I use this card with devices other than Tascam DA-6400 series recorders?
No, the IF-MA64-BNMADI is specifically designed as an internal interface card for the Tascam DA-6400 and DA-6400DP recorders. It cannot be used with other brands or models.
What is the maximum number of audio channels supported by MADI?
Standard MADI supports up to 64 channels of audio at 48kHz, 24-bit. It can also support 32 channels at 96kHz.
Do I need special software to use this card?
The card itself is hardware. Its functionality is managed through the settings and menus of the Tascam DA-6400/DA-6400DP recorder. No separate software is typically required for the card itself.
How do I ensure proper clock synchronization with MADI?
Synchronization is crucial. The DA-6400 should be set to use an external clock source (e.g., the incoming MADI signal) or to provide the clock signal to other devices. Ensure all connected MADI equipment is configured to sync to the same clock source.
Troubleshooting
No MADI signal detected
Verify that the BNC cables are securely connected at both ends and that the connected device is properly configured for MADI input/output. Check the sample rate and clock source settings on both the DA-6400 and the connected device.
Audio dropouts or clicks/pops
Ensure stable clock synchronization between the DA-6400 and the connected MADI device. Check MADI cable integrity; a damaged cable can cause intermittent signal loss. Reduce the number of active channels if nearing the MADI specification limit, or verify that the sample rate is supported by all devices in the chain.
Card not recognized by DA-6400
Ensure the card is properly seated in its slot. Power off the DA-6400 completely before re-seating the card. Consult the DA-6400's manual for any specific firmware requirements or troubleshooting steps for installed cards.
Pros and Cons
Pros
- Enables professional MADI audio networking.
- Directly compatible with Tascam DA-6400 series recorders.
- Provides expanded audio channel connectivity.
- Utilizes reliable BNC coax connectors for MADI signals.
- More affordable option for MADI integration compared to some alternatives.
Cons
- Lacks the 'through' BNC input present on the IF-MA64/EX model.
- Requires a compatible Tascam DA-6400 or DA-6400DP recorder to function.
- Limited to BNC MADI; does not support optical MADI.
Setup, Compatibility & Care
Setup: The IF-MA64-BNMADI is an internal interface card designed to be installed into a compatible Tascam DA-6400 or DA-6400DP unit. Installation typically involves opening the recorder chassis and seating the card into its designated slot, followed by securing it. Always refer to the DA-6400's user manual for specific installation procedures and safety precautions.
Compatibility: This card is exclusively compatible with the Tascam DA-6400 and DA-6400DP multitrack recorders. It provides BNC MADI connectivity. Ensure your other MADI devices use the same sample rate and clocking synchronization.
Care: Keep the interface card and the recorder's interior free from dust and debris. Ensure proper ventilation for the recorder to prevent overheating. Avoid exposing the BNC connectors to excessive force or contaminants. When cleaning the exterior, use a soft, dry cloth. Do not use liquid cleaners directly on the card or connectors.