Ideal Industries In-Line Push-In Wire Connectors - 4.00mm², Pack Of 10
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians, contractors, and DIY enthusiasts looking for a faster and more efficient way to connect wires. The Ideal Industries In-Line Push-In Wire Connectors offer a crimp-free, solderless solution for joining wires, saving time and simplifying installations. However, ensure you use the correct wire gauge and type for optimal performance.
All features
| Model Part Number | Ideal Industries In-Line Push-In Wire Connectors (10 Pack) |
|---|---|
| Brand | Ideal Industries |
Extended Product Information
FAQs
What wire sizes are compatible with these connectors?
These connectors accept solid wires from 0.5mm² - 4.0mm² and stranded wires from 1.0mm² - 2.5mm².
What is the voltage and current rating of the connectors?
The connectors are rated at 32A / 450V.
Are these connectors reusable?
While the connectors are designed for reliable connections, it's generally recommended to use new connectors for each installation.
Do I need any special tools to use these connectors?
No, these connectors are tool-free. Simply push the wire into the connector.
Can I use these connectors in wet locations?
The connectors are not specifically designed for wet locations. Use them in dry environments only unless otherwise specified.
What standards do these connectors comply with?
These connectors are BS 7671:2008 (17th Edition) compliant.
How do I ensure a good connection?
Ensure the wire is properly stripped and fully inserted into the connector until it stops. The transparent window allows for visual confirmation.
Troubleshooting
Connector doesn't hold the wire securely.
Ensure the wire is stripped to the correct length and fully inserted into the connector. Check the wire gauge to ensure it is within the connector's specifications.
Connection fails visual inspection.
Re-insert the wire, ensuring it is fully seated and making contact within the connector.
Connector overheats.
Check the current load and ensure it does not exceed the connector's 32A rating. Verify that the wire gauge is correct and that the connection is secure.
Pros and Cons
Pros
- Faster than traditional butt splices.
- No special tools required.
- Provides a secure and reliable connection.
- Suitable for a range of wire types and sizes.
- Easy visual inspection.
- Compliant with safety standards.
Cons
- Requires proper wire stripping before use.
- Limited to specific wire gauges.
- May not be suitable for all types of electrical applications.
- Requires careful insertion of wires to ensure a proper connection.
- Limited reusability.
Setup, Compatibility & Care
- Preparation:
- Ensure the power is turned OFF at the circuit breaker.
- Strip the wire ends to the recommended length (refer to wire manufacturer's specifications).
- Connection:
- Insert the stripped wire into the connector's opening until it stops.
- Ensure the wire is fully inserted and secure.
- Compatibility:
- Compatible with solid wires from 0.5mm² - 4.0mm² and stranded wires from 1.0mm² - 2.5mm².
- Rated at 32A / 450V.
- Care:
- Regularly inspect connections for any signs of damage or loosening.
- Do not exceed the connector's rated capacity.
- Avoid using in wet or damp environments unless specifically designed for such conditions.