soundcore Liberty 5 Pro - White - Active Noise Cancellation
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The soundcore Liberty 5 Pro earbuds are designed for users seeking superior call clarity and an immersive, personalized audio experience. Their key benefit lies in exceptional call quality, even in noisy environments, and adaptive Active Noise Cancellation. A potential caveat is the advanced feature set, which may require some time to fully explore and customize.
All features
| Colour | White |
|---|---|
| Headphones Noise Cancellation | Active |
| Model Part Number | Liberty 5 Pro |
| Brand | soundcore |
Extended Product Information
FAQs
How do I reset the soundcore Liberty 5 Pro?
Place both earbuds in the charging case and leave the lid open. Press and hold the button on the back of the charging case for approximately 10 seconds until the LED indicator flashes three times. The earbuds will then reset and be ready for pairing.
What is HearID 5.0?
HearID 5.0 analyzes your unique hearing profile through a series of tests within the soundcore app. It then creates a customized EQ setting tailored specifically to your ears, enhancing details and optimizing your listening experience.
Can I use only one earbud at a time?
Yes, both the left and right earbuds can be used independently. You can take calls or listen to audio with a single earbud.
How do I update the firmware?
Connect your earbuds to your device and open the soundcore app. If a firmware update is available, you will be prompted to download and install it. Ensure the earbuds remain connected and charged during the update process.
What is the battery life?
The earbuds offer up to 8 hours of playtime with ANC off and 6 hours with ANC on. The charging case provides an additional 26 hours of playtime, for a total of up to 34 hours. Fast charging provides 2 hours of playtime from a 10-minute charge.
How do I use the touchscreen on the charging case?
The 0.96″ touchscreen allows you to cycle through ANC modes, adjust EQ presets, and check battery status without needing to access your phone. Tap or swipe on the screen as indicated within the app for different functions.
Are the earbuds water-resistant?
The soundcore Liberty 5 Pro earbuds have an IPX5 rating, making them resistant to sweat and light splashes of water. They are not designed for swimming or submersion.
Troubleshooting
Earbuds not pairing
Ensure earbuds are charged and in the case with the lid open. Reset Bluetooth on your device and try again. If issues persist, perform a factory reset by holding the button on the back of the case for 10 seconds while the earbuds are inside.
No sound or low volume
Check that the earbuds are properly seated in your ears. Clean the ear tips and speaker grilles. Verify volume levels on your device and in the soundcore app. Ensure the correct HearID profile is active.
Active Noise Cancellation not effective
Ensure a proper seal in your ear canal. Check ANC settings in the soundcore app and ensure it is enabled. Clean ear tips for optimal fit. Update firmware via the soundcore app if available.
Charging case not charging earbuds
Clean the charging contacts on both the earbuds and inside the case. Ensure the case is plugged into a power source. Try a different USB cable and power adapter.
Touch controls unresponsive
Ensure the charging case is updated and touch controls are enabled in the soundcore app. Clean the indicated touch areas on the case. Restart your connected device.
Pros and Cons
Pros
- Exceptional call quality, even in noisy environments.
- Powerful and adaptive Active Noise Cancellation.
- Highly customizable audio experience tailored to the user.
- Convenient voice and touch controls.
- Innovative charging case with a touchscreen interface.
Cons
- Advanced features may require a learning curve for some users.
- Potential for over-customization if not managed carefully.
- The white color may show dirt more easily over time.
Setup, Compatibility & Care
Setup:
- Ensure the charging case is charged.
- Open the charging case with the earbuds inside to enter pairing mode.
- On your device, go to Bluetooth settings and select "soundcore Liberty 5 Pro" to connect.
- Download the soundcore app to access advanced features like HearID, EQ customization, and ANC settings.
Compatibility:
The Liberty 5 Pro is compatible with most Bluetooth-enabled devices, including smartphones (iOS and Android), tablets, and laptops.
Care:
- Clean the earbuds and charging case regularly with a soft, dry cloth.
- Use a slightly damp cloth for tougher marks, ensuring no moisture enters any openings.
- Keep the charging contacts on the earbuds and inside the case clean to ensure proper charging.
- Avoid exposing the earbuds to extreme temperatures or moisture.