Timeguard Electronic Timeswitch - NTT04


Currently unavailable


Currently unavailable
This guide is for users of the Timeguard NTT04 7-Day Compact Electronic Timeswitch. It helps you understand how to set up, operate, and troubleshoot the device to effectively automate your electrical devices. The key benefit is the ability to schedule devices to turn on and off automatically, saving energy and providing convenience. Note that this model features voltage-free contacts, which means it can be used to switch a wide range of devices, but it requires careful wiring to ensure correct operation.
| Model Part Number | NTT04 |
|---|---|
| Brand | Timeguard |
The battery life is up to 720 hours.
No, the NTT04 has a single-channel operation and can only control one circuit.
The NTT04 has voltage-free contacts, which means it can be used to switch a wide variety of devices.
It operates on 230 V AC.
Follow the instructions in the user manual. Generally, you'll use the buttons on the device to enter the current time.
The device should be installed in a dry location. If using outdoors, ensure it is protected from the elements.
Turn off the power to the device for a few minutes, then turn it back on. This may reset it. Refer to the user manual for specific reset instructions.
Check the programmed times to ensure they are correct. Verify that the current time is set accurately. Also, ensure the device is properly wired and receiving power.
Check the battery. Replace it if necessary. If the issue persists, check the power supply to the device.
Make sure the device is receiving power. Try resetting the device by turning off the power for a few minutes and then turning it back on.
Reset the current time on the device following the instructions in the user manual.
Verify the wiring to the load. Ensure the load is within the device's switching capacity.
Setup:
Compatibility:
The Timeguard NTT04 is compatible with standard 230V AC electrical systems. It can be used to control various devices, provided their power requirements are within the switch's specifications. Always check the device's technical specifications before connecting it.
Care: