KIAM Gorilla Power Electric Pressure Washer - GP4

Effortlessly tackle your toughest outdoor cleaning tasks with the Gorilla Power GP4 Electric Press...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

The KIAM Gorilla Power GP4 Electric Pressure Washer is designed for homeowners seeking an efficient solution for everyday outdoor cleaning tasks. It offers powerful cleaning performance with up to 140 bar maximum pressure, making it ideal for patios, driveways, and vehicles. A key benefit is its Auto Stop system, which conserves energy and reduces wear by pausing the pump when the trigger is released. However, its 5-meter hose length might limit reach for larger areas without repositioning the unit.

All features

Model Part NumberGP4
BrandKIAM

Extended Product Information

FAQs

What is the maximum water pressure?

The KIAM Gorilla Power GP4 has a maximum pressure of 140 bar.

What is the flow rate?

The rated flow rate is 6 litres per minute, with a maximum flow rate of 7 litres per minute.

Do I need a special water source?

No, it connects to a standard outdoor water tap. Ensure a consistent water supply for optimal performance.

How long is the power cord and hose?

The high-pressure hose is 5 meters long. The power cord length is not specified but is standard for a domestic appliance.

What maintenance does the unit require?

Regularly clean the water filter and inspect hoses and connections. Store in a dry place away from frost.

Is this suitable for heavy-duty commercial use?

The GP4 is designed for domestic and everyday outdoor cleaning tasks, not heavy-duty commercial applications.

How does the Auto Stop system work?

The Auto Stop system automatically shuts off the pump when the spray gun trigger is released, conserving energy and reducing wear on the motor.

Troubleshooting

Pressure washer will not start.

Ensure the unit is properly plugged into a working electrical outlet. Check that the water supply is turned on and that the hose is securely connected to the inlet.

Low pressure output.

Verify the water supply is adequate. Check for kinks in the high-pressure hose or blockages in the nozzle or water filter. Ensure the Auto Stop system is not engaged.

Water leaks from connections.

Tighten all hose connections securely. Inspect O-rings and seals for damage and replace if necessary.

Pump stops intermittently.

This may be the Auto Stop system engaging when the trigger is released. If it stops while the trigger is held, check for overheating or low water supply.

Pros and Cons

Pros

  • Effective for routine outdoor cleaning tasks.
  • Auto Stop system enhances safety and efficiency.
  • Compact and easy to store.
  • Good pressure for its class.
  • Straightforward operation.

Cons

  • The 5m hose may be short for larger areas.
  • Carbon-brush motor may require eventual replacement.
  • Best suited for light to moderate cleaning tasks.
  • No onboard storage for all accessories.

Setup, Compatibility & Care

Setup:

  1. Connect the high-pressure hose to the pressure washer outlet and the spray gun.
  2. Attach a suitable water supply hose (not included) to the water inlet on the pressure washer.
  3. Ensure the water supply is turned on and running freely through the unit before starting the motor.
  4. Select the appropriate nozzle for your cleaning task.
  5. Plug the pressure washer into a grounded electrical outlet.

Compatibility:

  • Requires a standard outdoor water tap connection.
  • Operates on standard household electrical power.

Care:

  • After each use, release any residual pressure by squeezing the spray gun trigger.
  • Store the unit in a dry place, protected from frost.
  • Periodically check the water filter for debris and clean as needed.
  • Wipe the exterior with a damp cloth to remove dirt.
  • Inspect the high-pressure hose and connections for wear or damage.