Ammo by Mig Outlining Black Acrylic Paints for Miniatures - A.MIG-F502
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for miniature painters seeking a high-quality, reliable black acrylic paint for outlining and detail work. The key benefit is its formulation for both brush and airbrush, offering versatility and a smooth finish. A potential caveat is the need for specific thinners for optimal airbrush performance. This paint is water-soluble, odorless, and non-toxic, featuring an included stainless-steel agitator for easy mixing within its 17ml jar.
All features
| Model Part Number | A.MIG-F502 |
|---|---|
| Brand | Mig Ammo |
Extended Product Information
FAQs
How do I ensure the paint is properly mixed?
Shake the jar vigorously for at least a minute. The included stainless-steel agitator is designed to break up pigment clumps and ensure a homogenous mixture.
Can I use this paint with regular water for thinning?
While you can use water for basic brush thinning and cleanup, for airbrushing, it is highly recommended to use the specific A.MIG-2000 Acrylic Thinner for optimal performance and to prevent clogging.
What is the drying time for this paint?
The paint dries completely in approximately 24 hours. Touch-dry time will be significantly shorter.
Is this paint suitable for beginners?
Yes, the non-toxic and water-soluble nature makes it beginner-friendly, especially for brush application. Airbrush use may require some practice.
What is the best way to clean my brushes after using this paint?
Clean your brushes immediately after use with plain water. For dried paint, use a dedicated brush soap or cleaner.
How long does the paint last once opened?
When stored properly with the lid tightly sealed in a cool, dry place, the paint should remain usable for a considerable time. Check for signs of drying or separation.
Troubleshooting
Paint is too thick for airbrushing
Thin with A.MIG-2000 Acrylic Thinner, starting with a ratio of 1:1 and adjusting as needed. Ensure the paint is thoroughly shaken.
Paint is clumping or drying on the brush/airbrush needle
Ensure the paint is adequately mixed and thinned. Clean your brush or airbrush more frequently during use. A flow improver can sometimes help.
Poor adhesion to the model surface
Ensure the model surface is clean, free of grease or dust, and has been properly primed. Reapply primer if necessary.
Paint is drying too quickly on the palette
Use a wet palette or add a small amount of acrylic retarder to the paint mix to extend drying time.
Pros and Cons
Pros
- Excellent for fine detail and outlining work.
- Suitable for both brush and airbrush application.
- Easy cleanup with water.
- Odorless and non-toxic for a pleasant hobby experience.
- Includes an agitator for convenient mixing.
Cons
- Requires a specific thinner (A.MIG-2000) for optimal airbrush thinning.
- Dries completely in 24 hours, which may be too long for some rapid layering techniques.
- 17ml jar size may be limiting for large-scale projects.
Setup, Compatibility & Care
Setup:
- Shake Well: Before each use, vigorously shake the 17ml jar to ensure the pigment and acrylic medium are fully integrated.
- Agitate: If mixing is difficult, open the jar and use a suitable tool to gently agitate the stainless-steel ball inside.
- Thinning: For brush application, the paint can often be used directly or with minimal thinning. For airbrush use, A.MIG-2000 Acrylic Thinner is highly recommended for optimal flow and to prevent clogging. Adjust thinning ratios based on your airbrush and desired coverage.
Compatibility:
This paint is designed to adhere to a variety of model surfaces, including plastic, resin, and metal, typically after priming. It is compatible with other water-based acrylic paints, though testing on a small area is advised before full application to ensure no adverse reactions.
Care:
- Cleaning Brushes: Clean brushes immediately after use with water. For stubborn residue, use a dedicated brush soap or cleaner.
- Airbrush Cleaning: Flush your airbrush thoroughly with water and then with an appropriate airbrush cleaner after use.
- Storage: Store the jar in a cool, dry place, away from direct sunlight, with the lid tightly sealed to prevent drying out.