Shopping.co.uk

Jōbū Large Fluted Wall Panels - Blue Maize - 240cm x 60cm

Not AvailableJōbū Large Fluted Wall Panels - Blue Maize - 240cm x 60cm

Introduce a cool, modern tone to your interiors with the Large Fluted Wall Panel in Maize Blue. Fi...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Jōbū Large Fluted Wall Panels in Blue Maize are designed for homeowners and interior designers seeking to add a modern, sophisticated architectural element to their spaces. The key benefit is the creation of a visually striking feature wall with depth and texture, using a calming yet contemporary blue shade. A potential caveat is the need for careful surface preparation for adhesive or screw installation. These panels offer a smooth matt veneer finish in a versatile mid-blue, featuring a semi-circular fluted profile for sculpted depth. Their flexible felt backing allows installation on both flat and curved surfaces, and the UV-protected surface ensures color longevity.

All features

BrandJōbū

Extended Product Information

FAQs

What is the primary benefit of the fluted design?

The semi-circular fluted profile creates subtle shadowing and architectural depth, adding visual texture and a sophisticated, modern aesthetic to the wall.

Can these panels be installed on a curved wall?

Yes, the flexible 3mm felt backing is designed to allow installation on both flat and gently curved surfaces.

What is the best method for cleaning the panels?

Clean with a soft, damp cloth. Mild soap solutions can be used for tougher marks, but avoid abrasive cleaners or harsh chemicals.

How are the panels installed?

They can be installed using a high-strength adhesive or screws, depending on the project requirements and surface type.

Will the Blue Maize color fade over time?

The panels feature a UV-protected surface designed to maintain consistent color over time, even in areas with exposure to light.

Are these panels suitable for high-traffic commercial areas?

Yes, they are suitable for both residential feature walls and commercial interiors, and the UV protection helps maintain color in high-traffic areas.

What are the dimensions of the panels?

The specific dimensions mentioned are 240cm x 60cm.

Troubleshooting

Panel not adhering securely

Ensure the wall surface is properly prepared (clean, dry, smooth). Use a high-strength adhesive specifically designed for wall panels, and apply it evenly. If using screws, verify that wall anchors are used or that the panel is screwed into studs.

Difficulty aligning fluted patterns between panels

Measure and plan your layout carefully before installation. Start from a central point or a prominent corner. Minor adjustments may be possible during initial placement before the adhesive sets.

Veneer surface scratched during installation

Handle panels with care. Use a sharp cutting tool for any necessary modifications. If minor scratches occur, consider a touch-up marker or consult the manufacturer for repair advice.

Panel won't conform to a curve

Verify the radius of the curve is within the panel's flexibility limits (typically for gentle curves). Ensure the felt backing is making full contact with the curved surface. Pre-warming the panel slightly in a warm room might increase pliability, but avoid excessive heat.

Pros and Cons

Pros

  • Adds significant architectural depth and texture to walls.
  • The Blue Maize color is a versatile and calming contemporary shade.
  • Flexibility to install on curved surfaces opens up creative design possibilities.
  • Durable UV protection maintains the color's integrity over time.
  • Lightweight design simplifies the installation process.
  • Modern aesthetic suits a wide range of interior design styles.

Cons

  • Requires careful surface preparation for optimal adhesion or secure screw mounting.
  • The fluted design may make cleaning more involved than smooth wall surfaces.
  • While flexible, extreme curves might still pose installation challenges.
  • Primarily decorative; does not offer soundproofing or insulation benefits.
  • Impact damage could chip or scratch the veneer finish.

Setup, Compatibility & Care

Installation:

  1. Surface Preparation: Ensure the wall surface is clean, dry, smooth, and free from dust or debris. For adhesive installation, a suitable high-strength wall panel adhesive is recommended. For screw installation, locate wall studs or use appropriate wall anchors for secure mounting.
  2. Cutting (if necessary): Panels can be cut using a sharp utility knife or a fine-toothed saw. Always measure carefully and cut on the reverse side for a cleaner finish.
  3. Application: Apply adhesive evenly to the back of the panel or the wall according to the adhesive manufacturer's instructions. Position the panel and press firmly. Alternatively, drill pilot holes through the panel and secure with screws, ensuring they are countersunk for a flush finish.
  4. Joining Panels: For a seamless look, butt the edges of the panels together, aligning the fluted patterns as closely as possible.

Compatibility:

  • Suitable for application on drywall, plaster, or properly prepared wood surfaces.
  • Can be installed on both flat and gently curved walls due to the flexible backing.
  • Best suited for interior spaces, including living rooms, bedrooms, home offices, and commercial areas.

Care:

  • Clean the panels with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the veneer.
  • For tougher marks, use a mild soap solution and wipe clean with a damp cloth, then dry thoroughly.
  • Protect from excessive moisture and direct, prolonged heat sources.