Bond it Superglue Activator Accelerator - 200ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Bond It Superglue Activator Accelerator, offering a fast and effective bonding solution for various materials. It allows for near-instant bonding, ideal for fine joints. However, optimal performance depends on proper application and material compatibility.
All features
| Colour | White |
|---|---|
| Model Part Number | BIC200 |
| Brand | Bond it |
Extended Product Information
FAQs
What materials can I use this product on?
You can use Bond It Superglue Activator Accelerator on MDF, Chipboard, Oak, Pine, PVCu, and Rubber.
How quickly does it bond?
Bonding times are typically 5-10 seconds for plastics and timber, and 1-3 seconds for rubbers at room temperature.
Do I need to use the activator with the adhesive?
Yes, the activator/accelerator is crucial for the instant bonding properties and to overcome the adverse effects of acidic surfaces.
Can I use this product on all types of plastics?
While suitable for many plastics, it's advisable to test on a small area first as compatibility can vary.
How should I store this product?
Store the product in a cool, dry place, away from direct sunlight and out of reach of children.
What should I do if the adhesive gets on my skin?
If adhesive comes into contact with skin, do not pull it apart. Soak in warm, soapy water and gently peel apart.
Troubleshooting
Bond not forming
Ensure surfaces are clean and dry. Apply the correct amount of adhesive and activator/accelerator. Hold firmly for the recommended time.
Slow bonding time
Check the ambient temperature and humidity. Higher humidity or lower temperatures may slow the bonding process.
Pros and Cons
Pros
- Fast bonding times
- Suitable for various materials
- Easy to apply
- Improves joint quality
- Prevents adhesive penetration
Cons
- Performance can vary based on material type and surface conditions
- Requires proper application for best results
- May not be suitable for all plastics
- Bonding times are affected by ambient conditions
Setup, Compatibility & Care
- Preparation: Ensure surfaces are clean, dry, and free from dust or grease.
- Application: Apply a small amount of adhesive to one surface.
- Activation: Spray the activator onto the other surface (if using spray) or apply the accelerator.
- Bonding: Bring the surfaces together and hold firmly for a few seconds.
Compatibility:
- Suitable for MDF, Chipboard, Oak, Pine, PVCu, and Rubber.
- Test on a small, inconspicuous area before applying to the entire project.
Care:
- Store in a cool, dry place.
- Avoid contact with skin and eyes.
- Keep out of reach of children.