PlastiKote Trade Permanent Spray Adhesive - 400ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a reliable adhesive for a variety of materials. The PlastiKote Trade Permanent Spray Adhesive offers strong, permanent bonds and fast-drying application, making it ideal for large surfaces. A potential caveat is the need for proper ventilation due to its aerosol nature.
All features
| Model Part Number | 071029 |
|---|---|
| Brand | PlastiKote |
Extended Product Information
FAQs
What surfaces can PlastiKote Trade Permanent Spray Adhesive be used on?
It can be used on paper, cardboard, wood, textiles, leather, cork, and various types of plastic. Always test on a small, inconspicuous area first, especially with plastics.
How long does it take to dry?
The adhesive is fast drying, allowing for handling and assembly shortly after application. Specific drying times can vary based on application thickness and environmental conditions.
Is this adhesive suitable for outdoor use?
While it provides permanent adhesion, it's best suited for indoor applications. Performance in direct sunlight or extreme weather conditions may vary. Always refer to product labeling for specific use cases.
How do I ensure an even application?
Shake the can well before and during use. Hold the can upright at a consistent distance of 6-8 inches (15-20 cm) from the surface and apply in a steady, sweeping motion.
What should I do if I get overspray on my project?
If the adhesive is still wet, carefully wipe it away with a clean cloth. If it has already dried, you may need to gently scrape it off or use a solvent recommended for adhesive removal, testing in a hidden area first.
How should I store the spray can?
Store the can in a cool, dry place, away from heat sources, sparks, and open flames. Ensure it is stored upright.
Can I reposition the items after applying the adhesive?
This adhesive creates a permanent bond, so repositioning is generally not possible once the items are pressed together. Ensure precise placement before bonding.
Troubleshooting
Uneven spray pattern or sputtering
Shake the can more vigorously and ensure the nozzle is clear. If the problem persists, the can may be partially clogged or empty.
Adhesive not sticking properly
Ensure surfaces are clean, dry, and free of contaminants. Verify application distance and ensure an even coat. For difficult materials, a second light coat might be necessary.
Overspray on unwanted areas
Use adequate masking tape and paper to cover surrounding areas before application. Adjust spray distance and angle to minimize drift.
Nozzle clogged after use
Invert the can after use and spray for 2-3 seconds to clear any residual adhesive from the nozzle. If already clogged, try cleaning with a suitable solvent (test in an inconspicuous area first).
Pros and Cons
Pros
- Provides a strong, permanent bond.
- Dries quickly for efficient project completion.
- Suitable for a wide array of materials.
- Efficiently covers large surfaces.
- Simple spray application.
Cons
- Requires good ventilation during use.
- Aerosol can may be difficult to control for very fine detail work.
- Permanent bond may not be suitable for projects requiring adjustments.
- Potential for overspray if not masked properly.
Setup, Compatibility & Care
Setup: Ensure the surface to be adhered is clean, dry, and free from dust, oil, or grease. Protect surrounding areas with masking paper or tape to prevent overspray. Shake the can vigorously for at least one minute before use and periodically during application. Hold the can upright, approximately 6-8 inches (15-20 cm) from the surface. Apply in a well-ventilated area.
Compatibility: This adhesive is suitable for bonding paper, cardboard, wood, textiles, leather, cork, and various types of plastic. It is not recommended for certain plastics like polyethylene or polypropylene without prior testing, nor for Styrofoam.
Care: Store the can in a cool, dry place, away from direct sunlight and heat sources. After use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging. Dispose of the empty can according to local regulations.