Bond It Primer & Flexible Admixture - 1L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Bond It Primer & Flexible Admixture is designed for tilers and DIY enthusiasts looking to enhance the performance of their tiling projects. Its key benefit is to significantly improve adhesion and flexibility, reducing issues like swelling on substrates and preventing cracking in cement-based adhesives. A potential caveat is its specific formulation, which may require adherence to precise mixing ratios for optimal results.
All features
| Brand | Norbreck Bathroom & Tile Centre |
|---|
Extended Product Information
FAQs
Can I use this with ready-mixed tile adhesives?
This product is primarily designed as an additive for cement-based adhesives and grouts. It is not generally recommended for use with ready-mixed adhesives unless explicitly stated by the adhesive manufacturer.
How much admixture should I use?
When used as an admixture for cement-based adhesives or grouts, always refer to the specific instructions provided by the adhesive/grout manufacturer for the correct ratio. For example, to improve Bond It RAPID-SET(C1F) for porcelain tiles, use 2.5 Litres per 20kg bag.
What surfaces can I use this primer on?
It can be used on porous and dusting surfaces like plaster, plasterboard, timber, ply, and MDF. It also improves adhesion on difficult substrates such as vinyl tiles, asphalt, and terrazzo.
Does this product make the adhesive waterproof?
While it enhances adhesion and flexibility, it does not inherently make the adhesive or grout waterproof. Ensure appropriate waterproofing measures are taken for wet areas.
How long does the primer need to dry before tiling?
The primer should be allowed to dry completely before tiling. Drying times can vary depending on ambient temperature and humidity, but typically allow at least a few hours.
Can I use this in very cold or hot conditions?
It's best to use this product within the temperature range recommended by the cement-based adhesive or grout manufacturer. Avoid application in freezing conditions or extreme heat.
What is the shelf life of the product?
Stored correctly in its original sealed container in a cool, dry place, the product generally has a shelf life of 12 months.
Troubleshooting
Adhesive not bonding effectively.
Ensure the surface was properly primed and allowed to dry, or that the admixture was mixed in the correct ratio with the cement-based adhesive. Check for surface contaminants like dust or grease.
Grout lines cracking after tiling.
The admixture may not have been used, or not in sufficient quantity, to provide the necessary flexibility. Ensure it's incorporated into the adhesive and/or grout as recommended for the specific application.
Substrate swelling after tiling.
The primer may not have been applied, or applied too thinly, on a porous substrate like plasterboard or timber. Ensure adequate coverage and drying time for the primer.
Adhesive is difficult to spread.
Ensure the admixture is thoroughly mixed into the cement-based adhesive according to the manufacturer's instructions. Inconsistent mixing can affect workability.
Pros and Cons
Pros
- Increases the flexibility of adhesives and grouts.
- Ensures a stronger bond on various surfaces.
- Protects moisture-sensitive substrates from swelling.
- Improves the workability of cement-based adhesives.
- Suitable for both priming and admixture applications.
Cons
- Requires precise mixing ratios for optimal performance.
- Primarily for use with cement-based adhesives and grouts.
- Not a standalone adhesive or grout.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. For porous surfaces, apply as a primer using a brush or roller, allowing it to dry completely before tiling. For use as an admixture, follow the specific mixing instructions for your chosen cement-based adhesive or grout. Always refer to the adhesive/grout manufacturer's instructions for the correct ratio of admixture to powder.
Compatibility: This admixture is designed for use with cement-based tiling adhesives and grouts. It is particularly recommended for enhancing the performance of Bond It RAPID-SET(C1F) for porcelain tiles. It is *not* compatible with ready-mixed tile adhesives unless specifically stated by the adhesive manufacturer.
Care: Store the product in its original container in a cool, dry place, away from direct sunlight and frost. Keep out of reach of children. Clean tools and equipment immediately after use with water.