JT Sprocket - Honda CB 125F 2015-2024 Front 14T
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JT Sprocket 14T is an essential upgrade for Honda CB 125F owners (2015-2024) looking to maintain reliable power transmission and factory-grade performance. Engineered for precision, this sprocket is ideal for riders performing routine maintenance or drivetrain overhauls, though it requires specific mechanical knowledge for safe installation.
All features
| Model Part Number | JTF1264.14 |
|---|---|
| Brand | JT |
Extended Product Information
FAQs
Does this sprocket come with a mounting kit?
No, this listing is for the sprocket only. You should reuse your existing hardware or purchase new retaining clips if worn.
Can I use this on a non-Honda CB 125F?
No, this part is specifically engineered for the mounting shaft and dimensions of the 2015-2024 Honda CB 125F.
Should I replace the chain when I install this sprocket?
Yes, it is highly recommended to replace the chain and rear sprocket simultaneously to ensure even wear across the drivetrain.
Is 14T the standard tooth count for this motorcycle?
Yes, 14T is the standard front sprocket size for the Honda CB 125F 2015-2024 models.
How often should I inspect the front sprocket?
You should inspect the teeth condition every 3,000 to 5,000 miles, or whenever you perform chain maintenance.
Troubleshooting
Excessive noise during acceleration
Check chain tension; over-tight or loose chains cause noise when hitting the sprocket teeth.
Sprocket appears loose on the shaft
Verify the retaining plate is properly seated and the bolts are torqued to the manufacturer's specification.
Pros and Cons
Pros
- Direct OEM-spec fitment for Honda CB 125F (2015-2024)
- High-strength steel construction for long-term durability
- Lightweight design minimizes drivetrain drag
- Cost-effective maintenance solution compared to OEM parts
Cons
- Requires professional mechanical tools for installation
- Must be replaced alongside the chain for optimal longevity
- Not compatible with non-125F models
Setup, Compatibility & Care
Installation should be performed on a level surface using a rear paddock stand. You will need a socket set and a chain breaker/riveting tool. Always ensure the sprocket retaining plate is seated correctly to prevent loosening. Regarding compatibility, this unit is exclusively designed for the Honda CB 125F (2015-2024). For care, keep your drive chain properly lubricated and tensioned per your owner's manual. Inspect the sprocket teeth during every oil change; if they appear hooked or sharpened, it is time for a replacement to avoid chain failure.