KLEVV CRAS V DDR5 RGB 32GB RAM Kit - 7600MHz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Klevv CRAS V DDR5 32GB (2x16GB) 7600MHz memory kit is designed for high-end PC enthusiasts and gamers who require top-tier performance for intensive workloads and AAA gaming. It delivers exceptional speed and stability through advanced DDR5 technology and premium SK Hynix components, though users should ensure their motherboard and CPU can handle 7600MHz XMP/EXPO profiles for optimal performance.
All features
| Series | CRAS V |
|---|---|
| Model Part Number | KD5AGUA80-76B360G |
| Brand | KLEVV |
Extended Product Information
FAQs
Does this RAM require a specific motherboard?
Yes, to reach 7600MHz, you need a high-performance motherboard that supports high-frequency DDR5 XMP/EXPO profiles.
Can I mix this with my old RAM?
Mixing different memory kits is not recommended and can lead to system instability or lower performance.
What is the CAS latency of this kit?
The CRAS V 7600MHz kit operates at a CAS latency of 36.
How tall are these memory modules?
The modules have a height of 44mm, designed to offer low clearance for large CPU coolers.
Does the RAM include ECC?
Yes, it features on-die ECC technology, which provides error detection and correction within the memory chip itself.
What is the operating voltage?
The memory kit operates at 1.4V to maintain the high performance of 7600MHz.
Troubleshooting
System fails to boot after installing new RAM
Ensure the modules are fully seated in the slots until the clips click; try one module at a time to rule out a single faulty stick.
System unstable at rated 7600MHz speed
Update your motherboard BIOS to the latest version and verify that your CPU's memory controller supports high-frequency DDR5.
RGB lighting is not synchronized
Use your motherboard's native RGB control software to detect the memory modules, or download the Klevv-recommended control utility.
Pros and Cons
Pros
- High-speed 7600MHz output for maximum system responsiveness
- Effective thermal management via premium aluminium heatsinks
- Compact 44mm profile minimizes interference with air coolers
- Reliable component selection with high-quality SK Hynix chips
Cons
- Requires high-end motherboard support to reach rated 7600MHz speeds
- Higher voltage requirements (1.4V) compared to standard JEDEC modules
- May require manual BIOS configuration for stability
Setup, Compatibility & Care
To install, ensure your system is powered down and the PSU is switched off. Insert the DIMMs into the secondary and fourth slots (A2/B2) for dual-channel operation on most motherboards.
Compatibility Note: 7600MHz is an extreme frequency. Always check your motherboard's QVL (Qualified Vendor List) to confirm support for 7600MHz kits.
BIOS Setup: Upon first boot, enter your BIOS settings and enable the XMP or EXPO profile. Without this step, the RAM will run at lower, default JEDEC speeds. Keep the modules clear of dust by using canned air occasionally to ensure the heatsinks maintain proper airflow.