Clarke Battery Charger - 2A - 6V/12V
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Clarke Battery Charger - 2A - 6V/12V (IBC2) is designed for users needing to maintain and charge various 6V and 12V lead-acid and LiFePO4 batteries up to 60Ah. Its primary benefit is a fully automated 6-stage charging cycle that optimizes battery health and performance. A key caveat is its incompatibility with standard Lithium-ion and Li-Po batteries. This charger offers a safe and efficient solution for keeping batteries in optimal condition for vehicles, leisure equipment, and more.
All features
| Model Part Number | IBC2 |
|---|---|
| Brand | Clarke |
Extended Product Information
FAQs
What types of batteries can this charger charge?
It can charge all types of 6V/12V lead-acid batteries (WET, MF, EFB, STD, GEL, AGM) and LiFePO4 batteries up to 60Ah.
Can I use this charger for my smartphone's lithium-ion battery?
No, this charger is not suitable for standard Lithium-ion and Li-Po batteries. It is specifically designed for Lead Acid and LiFePO4 chemistries.
What is the maximum battery size this charger can handle?
The charger is designed for batteries up to a capacity of 60Ah.
How do I know when the battery is fully charged?
The charger features LED indicator lights that show the progress of the charging cycle. Refer to the user manual for specific light indicators for each stage, but typically, the final stages indicate completion or maintenance mode.
What safety features are included?
It includes protection against reverse polarity, short circuits, and overloads, along with an inline fuse for added safety.
Does the charger come with all necessary cables?
Yes, it includes detachable battery clamps and ring terminals for connection to your battery.
What is the charging current?
The charger provides a charging current of 2A for both 6V and 12V batteries.
Troubleshooting
Charger does not power on (no lights).
Check that the mains power cable is securely plugged into both the charger and a working outlet. Verify the outlet has power using another device.
Charger indicates an error or fault light.
This may indicate reverse polarity or a short circuit. Disconnect the charger from the power source and re-check connections, ensuring positive (+) is connected to positive and negative (-) to negative. Ensure battery terminals are clean.
Battery not charging or charging very slowly.
Confirm the battery capacity is within the 60Ah limit. Ensure the battery is compatible (Lead Acid or LiFePO4). Check battery voltage; if the battery is deeply discharged, it might take time for the charger to activate.
Charger gets excessively hot during operation.
Ensure the charger's ventilation slots are clear and unobstructed. Operate the charger in a well-ventilated area. If overheating persists, discontinue use and contact support.
Pros and Cons
Pros
- Automated multi-stage charging for optimal battery health.
- Supports a wide range of battery chemistries and voltages (6V/12V Lead Acid & LiFePO4).
- Includes versatile connection options (clamps and ring terminals).
- Comprehensive safety features protect against common electrical hazards.
- Compact and suitable for batteries up to 60Ah.
- Clear LED indicators for easy monitoring.
Cons
- Not compatible with standard Lithium-ion and Li-Po batteries.
- Maximum charging current of 2A may be slow for very large or heavily discharged batteries.
- Limited to batteries up to 60Ah capacity.
Setup, Compatibility & Care
Setup:
- Ensure the charger is disconnected from the power source.
- Connect the appropriate terminal (clamp or ring) to the corresponding battery terminal (+ to +, - to -).
- Ensure a secure connection to avoid sparking.
- Connect the charger to a suitable mains power outlet.
- The charger will initiate its self-check and begin the charging cycle.
Compatibility:
- Voltage: 6V and 12V systems.
- Battery Types: Lead Acid (WET, MF, EFB, STD, GEL, AGM) and LiFePO4.
- Maximum Capacity: 60Ah.
- NOT Compatible With: Standard Lithium-ion and Li-Po batteries.
Care:
- Keep the charger clean and free from dust and debris. Use a dry or slightly damp cloth for cleaning; do not use solvents.
- Store the charger in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
- Inspect the cables and connectors regularly for any signs of damage. Replace if damaged.
- Ensure the charger's ventilation slots are not blocked.