Angelus Paintable Filler - 2oz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Angelus Paintable Filler is designed for footwear restorers and custom artists who need a reliable way to smooth out surface imperfections on shoes. Its primary benefit is providing a seamless, professional-grade base that prepares leather, rubber, and synthetic materials to accept paint without showing cracks or scuffs. While it is an essential tool for achieving a factory-smooth finish, it is important to note that it is intended for surface-level cosmetic repairs rather than deep structural damage.
All features
| Brand | Angelus |
|---|
Extended Product Information
FAQs
Can this filler be used on fabric shoes?
This product is primarily formulated for leather, rubber, and synthetic surfaces and may not adhere correctly to flexible fabric or mesh.
How long does it take to dry?
Drying time depends on the thickness of the application and humidity, but it is recommended to wait at least 1-2 hours, or until the filler is firm and no longer tacky.
Do I need to prime the filler before painting?
The filler acts as a base, but applying a light layer of primer or your first base coat of Angelus paint is recommended for the best color adhesion.
Is this filler flexible after drying?
It is designed to move with the material to an extent, but it is best used on areas of the shoe that do not experience extreme creasing or bending.
Can I mix it with paint?
No, this product is designed to be used as a surface filler and should be applied separately from your paint layers.
Troubleshooting
Filler is cracking after drying
The layer applied was likely too thick; apply thinner layers and allow sufficient drying time between each.
Filler is peeling off the surface
Ensure the surface was thoroughly cleaned with a deglazer or appropriate leather prep to remove all oils before application.
Difficulty sanding to a smooth finish
Use a higher grit sandpaper (such as 800 or 1000 grit) to achieve a finer finish, and ensure the filler is fully cured before starting.
Pros and Cons
Pros
- Dries to a smooth, sandable finish
- Highly compatible with various footwear materials
- Prevents cracks and texture issues in custom paint jobs
- Easy to apply for both beginners and professionals
Cons
- Not suitable for deep structural repairs
- Requires proper surface preparation for long-term adhesion
- Needs adequate drying time before sanding
Setup, Compatibility & Care
Before using the filler, ensure your footwear is completely clean and dry using a deglazer to remove any oils or factory finishes. Apply the filler using a small palette knife or applicator tool, working it into the damaged area until flush with the surface. Allow the filler to dry completely—avoid rushing this stage to ensure proper hardness. Once dry, use fine-grit sandpaper to smooth the area to your desired finish. Wipe away any dust before applying your base coat or color. Store the container in a cool, dry place and ensure the lid is tightly sealed after every use to prevent the product from drying out inside the jar.