Tsukineko Versacraft Ink Pad - Ultramarine
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for crafters and artists looking for a versatile, permanent ink for stamping on various materials. The Tsukineko Versacraft Ink Pad in Ultramarine offers vibrant, opaque color that adheres to fabric, paper, wood, and more. A key benefit is its archival quality and permanence on fabric when heat-set. However, ink may wash out of fabrics before heat setting, and proper heat setting is crucial for durability.
All features
| Model Part Number | VK-118 |
|---|---|
| Brand | Tsukineko |
Extended Product Information
FAQs
What surfaces can I use the Ultramarine Versacraft ink pad on?
You can use it on fabric, unpainted wood, uncoated paper, Japanese papers, tanned leather, and unglazed pottery.
How do I make the ink permanent on fabric?
Ink must be heat set on textiles with an iron set to 'cotton' or 'high' temperature for at least 15 seconds. Place a cloth between your project and the iron. A heat gun or hairdryer can also be used.
How long does the ink take to dry?
Drying time varies based on the surface, material, and humidity. On paper, it dries naturally. On other materials, heat setting is required for permanence and also acts as a drying method.
Can I wash items stamped with Versacraft ink?
Yes, after the ink has been properly heat-set on textiles, items can be washed. Durability may vary by fabric type.
Is this ink archival?
Yes, Versacraft ink is archival and acid-free, making it suitable for long-term projects like scrapbooking.
Can I use this ink on glossy surfaces?
Versacraft ink is best suited for porous or semi-porous surfaces. It may not adhere well to glossy or non-porous materials without significant testing and preparation.
What is the size of the ink pad?
The raised pad size is 76mm x 47mm.
Troubleshooting
Ink does not adhere permanently to fabric.
Ensure the ink is properly heat-set. Use an iron on a high cotton setting for at least 15 seconds, with a protective cloth between the iron and the fabric. A heat gun or hairdryer can also be used. Check that the fabric was pre-washed to remove sizing.
Stamp image is faint or inconsistent.
Ensure the stamp is thoroughly inked by dabbing it evenly onto the Versacraft pad. Check that the stamp surface is clean and free of debris. If the ink pad seems dry, consider refreshing it with a compatible re-inker.
Ink washes out before heat setting.
This is normal for some fabrics. Heat set the stamped item as soon as possible after stamping. Some temporary staining may occur on certain fabrics prior to heat setting.
Ink smudges easily on paper.
Allow adequate drying time for the ink on paper. For faster drying or enhanced permanence on paper, a light pass with a heat gun can be beneficial, though typically not required for most paper applications.
Pros and Cons
Pros
- Excellent adhesion on a wide range of porous and semi-porous surfaces.
- Archival quality makes it suitable for long-term projects.
- Durable and washable on fabric after proper heat setting.
- Opaque color provides good coverage.
- Water-based and acid-free.
Cons
- Requires heat setting on fabric for permanence and washability.
- Ink can wash out of fabric if not heat-set promptly.
- Drying and heat setting times vary significantly by material and environmental conditions.
- May leave some staining on certain fabrics even before heat setting.
- Not recommended for non-porous surfaces without proper preparation and testing.
Setup, Compatibility & Care
Setup: The Versacraft Ink Pad is ready for immediate use. Ensure your stamp is clean and dry before inking. Apply the stamp to the ink pad with even pressure, ensuring the raised pad covers the stamp surface adequately.
Compatibility:
- Recommended Surfaces: Fabric (cotton, linen, etc.), unpainted wood, uncoated paper, Japanese papers, tanned leather, unglazed pottery.
- Heat Setting: Crucial for permanence on textiles, polymer clay, wood, porcelain, and leather. Use a household iron on a high cotton setting (at least 15 seconds, with a protective cloth), a heat gun, or a hairdryer.
- Not Recommended For: Glossy or non-porous surfaces without testing, as adhesion may be poor.
Care:
- Cleaning Stamps: Clean stamps immediately after use with a stamp cleaner or water and mild soap.
- Ink Pad Care: Keep the ink pad closed when not in use to prevent drying. Store in a cool, dry place. If the pad begins to dry out over time, consider using a compatible re-inker (sold separately) to refresh the ink.
- Fabric Washing: After heat setting, items can be hand-washed or machine-washed on a gentle cycle. Results may vary based on fabric type.