Montana GOLD Spray Paint - 400ml - Gleaming Pink

For the most vibrant fluorescent glow, apply the paint to a primed, dry white surface. This provides a bright base that maximizes the luminosity of the fluorescent pigments. Using a white primer like Montana GOLD Shock White is highly recommended.

While the paint can adhere to flexible surfaces, it is not specifically designed as fabric paint and may become stiff or crack with repeated flexing. For best results on fabric, consider specialized fabric paints.

The paint is fast-drying. Drying times can vary based on application thickness, humidity, and temperature, but typically it is touch-dry within 10-15 minutes and fully cured within 24 hours.

The longevity of the fluorescent effect depends on exposure to UV light and environmental conditions. Applying a clear coat offers UV protection but may slightly diminish the intensity of the glow. Fluorescent colors generally have lower lightfastness than standard colors.

Yes, Montana GOLD Fluorescent colors can be used in conjunction with other Montana GOLD color shades and the Montana TECH and EFFECT ranges. Ensure the underlying layer is completely dry before applying subsequent coats.

Yes, the paint provides a weather-resistant finish, making it suitable for outdoor projects. However, for maximum longevity and color retention, especially for fluorescent colors, consider applying a UV-protective clear coat.

A low-pressure system means the paint is expelled from the can with less force. This allows for greater control over the spray, preventing excessive mist and enabling more precise application, which is ideal for detailed work and smooth gradients.

Due to specific shipping regulations and restrictions for aerosol products, particularly fluorescent paints, this item cannot be shipped internationally or via certain carriers like Royal Mail outside the UK mainland.

Ensure the nozzle is not clogged. Shake the can thoroughly. Turn the can upside down and spray briefly to clear the nozzle. If still clogged, remove the nozzle and soak it in a solvent like acetone, then clean with a fine needle.

Shake the can more vigorously. Maintain a consistent distance from the surface (approx. 15-25cm). Ensure the surface is clean and dry. Try a different nozzle for a finer or broader spray pattern.

The surface may be too absorbent, or the paint is being applied too thickly or from too close. Apply in thinner, lighter coats. Increase the distance between the can and the surface. Ensure the surface is properly primed and dry.

Ensure the can was shaken sufficiently. Apply to a properly primed white surface for maximum luminosity. The ambient temperature may be too low; spray in a warmer environment.