Shopping.co.uk

Loctite Precision Glue - 6 Pack

Not AvailableLoctite Precision Glue - 6 Pack

Handle precise and instant repairs effortlessly with this value 6-pack of Loctite Precision Glue, ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This value 6-pack of Loctite Precision Glue is for DIY enthusiasts, crafters, and anyone needing quick, accurate repairs. Its key benefit is the long precision nozzle for mess-free application on small areas, with a fast-acting formula that bonds in seconds. A caveat is that cyanoacrylate glues require careful handling and are best for non-porous surfaces.

All features

BrandLoctite

Extended Product Information

FAQs

How long does it take for the glue to fully cure?

The glue sets in seconds, providing an initial bond. Full cure typically takes 24 hours, after which the bond reaches its maximum strength.

Can I use this glue on flexible materials like rubber or leather?

Yes, this glue can bond rubber and leather. However, for very flexible or porous materials, a different type of adhesive might provide a more durable and flexible bond.

What is the shelf life of this glue?

When stored properly in a cool, dry place with the cap sealed, the glue typically has a shelf life of about one year.

Is this glue waterproof?

While the bond is generally water-resistant once cured, it is not fully waterproof and may degrade with prolonged submersion in water.

Can I use this on fabric?

This instant adhesive is generally not recommended for fabrics as it can soak through and leave a stiff residue. Specialized fabric glues are better suited for textile applications.

How do I clean up uncured glue?

Wipe away uncured glue immediately with a dry cloth. For stubborn residue, a small amount of acetone (nail polish remover) on a cloth can sometimes help, but test on an inconspicuous area first as it may damage some finishes.

Troubleshooting

Glue not dispensing

Ensure the nozzle is not clogged. Gently prick the tip with a fine needle if necessary. Make sure the cap was properly sealed after the last use.

Bond is weak or fails

Surfaces may not have been clean or dry. Ensure surfaces are free of dust, oil, or moisture. Check that the parts were held together long enough for the initial set.

Glue has bonded skin

Do not force parts apart. Soak the bonded area in warm, soapy water and gently try to peel or roll the skin apart. For large areas or digits, seek medical attention.

Excess glue visible after curing

Carefully try to scrape away the excess cured glue with a sharp blade. For a cleaner finish, a specialized cyanoacrylate remover can be used on the surrounding material, but test first.

Pros and Cons

Pros

  • Precise application with the long nozzle reduces mess.
  • Bonds quickly, saving time on repairs.
  • Dries clear for an aesthetically pleasing finish.
  • Versatile for use on many different materials.
  • Comes in a convenient 6-pack for ongoing use.

Cons

  • Cyanoacrylate adhesive can bond skin instantly; use with caution.
  • Not suitable for porous materials like untreated wood or fabric where it can soak in.
  • Can become brittle over time if subjected to extreme temperature changes.
  • Requires precise alignment as it bonds very quickly.
  • Fumes can be irritating to some individuals; use in a well-ventilated area.

Setup, Compatibility & Care

Setup:

  1. Prepare Surface: Ensure the surfaces to be bonded are clean, dry, and free from dust, oil, or grease.
  2. Open Tube: Carefully remove the cap. For the first use, a small initial test bead on scrap material is recommended to ensure flow.
  3. Apply Glue: Apply a small amount of glue to one surface using the precision nozzle. Avoid excessive application.
  4. Join Surfaces: Immediately press the parts together firmly and hold for several seconds until the bond sets.

Compatibility:

This glue is suitable for bonding:

  • Plastics
  • Wood
  • Metal
  • Rubber
  • Ceramics
  • Leather

It is *not* recommended for use on polystyrene, polyethylene, PTFE, or fabrics. Always test on an inconspicuous area if unsure.

Care:

  • Storage: Store tubes in a cool, dry place, away from direct sunlight and heat. Keep the cap tightly sealed after each use to prevent drying out.
  • Cleaning: Remove excess uncured glue immediately with a dry cloth. Cured glue can be carefully scraped away or softened with a specialized cyanoacrylate remover (test in an inconspicuous area first).
  • Safety: Avoid contact with skin and eyes. Use in a well-ventilated area. Keep out of reach of children.