NCA16 Non-Chlorinated Variable Spray Adhesive - 500mL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The NCA16 Non-Chlorinated Variable Spray Adhesive is a heavy-duty contact adhesive designed for professional use in upholstery, carpet fixing, and decorative trades. Its key benefit is a strong, versatile bond with a low-odor, non-chlorinated formula, offering variable spray control for precise application. A notable caveat is its unsuitability for bonding plasticised PVC, PVC-coated materials, or expanded polystyrene.
All features
| Model Part Number | ASO0604 |
|---|---|
| Brand | Aerosol Solutions |
Extended Product Information
FAQs
What is the maximum operating temperature for this adhesive?
The maximum operating temperature for the NCA16 Non-Chlorinated Variable Spray Adhesive is 50°C.
Can I use this adhesive on PVC materials?
No, this adhesive is not suitable for bonding plasticised PVC or PVC-coated materials.
Is this adhesive safe to use indoors?
Yes, it has a low odor formula, but adequate ventilation is still recommended during application.
How long does the adhesive need to become tacky?
It typically takes 5-15 minutes for the adhesive to become tacky, depending on ambient temperature and humidity.
What surfaces can I bond with this adhesive?
It is ideal for foam-backed carpets, upholstery, foam, wood, and many other porous and non-porous materials, excluding specific plastics.
How do I clean up excess adhesive?
Wipe away wet adhesive immediately with a cloth. Once dry, it may be difficult to remove and may require mechanical means or a suitable solvent, testing in an inconspicuous area first.
What does 'variable spray' mean?
Variable spray means you can adjust the spray pattern from narrow to wide, allowing for more precise application and control depending on the task.
Troubleshooting
Uneven spray pattern
Ensure the nozzle is clean and clear. Shake the can vigorously before and during use. Adjust the nozzle setting if available.
Adhesive not bonding effectively
Check that surfaces are clean, dry, and free from contaminants. Ensure the adhesive was allowed to become sufficiently tacky before joining surfaces. Verify that the materials are compatible and not on the 'not suitable for' list.
Can not spray
Shake the can well. Turn the can upside down and spray briefly to clear the nozzle. Ensure the nozzle is properly attached.
Strong odor persists
While low odor, some scent is normal. Ensure adequate ventilation in the work area during and after application.
Pros and Cons
Pros
- Strong and reliable bond for various materials
- Low odor for improved user comfort
- Adjustable spray pattern offers precision
- Non-chlorinated formula is a safer choice
- Suitable for common trade applications like upholstery and carpet installation
Cons
- Not suitable for plasticised PVC or PVC-coated materials
- Cannot be used on expanded polystyrene
- Maximum operating temperature of 50°C limits some high-heat applications
- Requires adequate ventilation during use
Setup, Compatibility & Care
Setup: Ensure surfaces to be bonded are clean, dry, and free from grease or dust. Shake the can vigorously before use. For variable spray, adjust the nozzle to the desired pattern. Apply adhesive evenly to one or both surfaces from a distance of approximately 15-25cm. Allow the adhesive to become tacky (usually 5-15 minutes, depending on conditions) before joining the surfaces under pressure.
Compatibility: Suitable for bonding foam-backed carpets, upholstery fabrics, foam, wood, and many other porous and non-porous materials. Not suitable for: plasticised PVC, PVC-coated materials, or expanded polystyrene.
Care: Store in a cool, dry place away from direct sunlight and sources of ignition. After use, turn the can upside down and spray for a few seconds to clear the nozzle. Dispose of the can responsibly according to local regulations.