Choose Your Print Premium White Wine Glasses Kitchen Splashback - 700mm x 750mm

Glass Kitchen Splashbacks Transform your kitchen into a stunning focal point with our premium Glas...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners looking to enhance their kitchen's aesthetic and functionality. The key benefit is a durable, easy-to-clean surface that protects walls while offering customisable designs. A potential consideration is the need for precise measurement and professional installation for a seamless fit. Our Glass Kitchen Splashbacks offer a premium solution for wall protection, featuring toughened glass, customisable designs, and a sleek, modern finish.

All features

Model Part Number70 X 75Cm
BrandChoose Your Print

Extended Product Information

FAQs

Can I install this splashback myself?

Yes, with careful measurement and preparation, DIY installation is possible. However, for a perfect finish, especially for larger panels, professional installation is recommended.

Is the glass safe to use behind a gas hob?

Yes, the toughened glass is heat-resistant. Ensure there is adequate clearance between the splashback and the hob as per safety regulations for your cooking appliance.

What kind of designs can I choose from?

You can select from a wide variety of pre-designed prints and patterns, or you can upload your own high-resolution image to create a truly custom splashback.

How thick is the glass?

The exact thickness can vary, but our splashbacks are crafted from toughened glass designed for durability in a kitchen environment. Specific product details should be checked for precise specifications.

Can I cut the splashback to size if needed?

Glass splashbacks are typically cut to size before manufacturing. Attempting to cut toughened glass on-site is not recommended and can lead to breakage. Order the precise size required.

What are the available sizes?

Our Glass Kitchen Splashbacks are available in a range of standard sizes, including 600x600mm, 600x650mm, 600x750mm, 700x650mm, 700x750mm, 900x650mm, and 900x750mm.

What warranty is offered?

Please refer to the specific product listing or warranty information provided by the retailer for details on warranty coverage.

Troubleshooting

Splashback has smudges or streaks after cleaning

Use a clean microfiber cloth and a glass cleaner. Ensure you are not using too much cleaner, and wipe in a consistent direction (e.g., horizontal or vertical).

Adhesive is not holding the splashback securely

Ensure the wall surface was completely dry and free from dust or grease before application. Use a high-strength, appropriate adhesive recommended for glass and the wall type.

Minor chips or scratches on the surface

Small chips or scratches may be difficult to repair. For significant damage, consider replacing the affected section or the entire splashback. Avoid using abrasive cleaning materials.

Uneven fit against the wall or countertop

This often indicates an issue with the initial wall preparation or measurement. For minor gaps, a suitable sealant might be used. For significant misalignment, re-installation may be necessary.

Pros and Cons

Pros

  • Highly durable and impact-resistant
  • Easy to clean and maintain
  • Customisable to match any kitchen decor
  • Adds a modern and sleek aesthetic
  • Protects walls from splashes and grease

Cons

  • Requires precise measurement for optimal fit
  • Installation may require professional assistance for best results
  • Glass can be heavy, potentially complicating handling
  • Not suitable for covering damaged wall surfaces directly without preparation

Setup, Compatibility & Care

Setup:

  1. Measure Carefully: Ensure accurate measurements of the wall area before ordering to select the correct size.
  2. Prepare Surface: The wall should be clean, dry, and smooth. Remove any old wallpaper or uneven paint.
  3. Adhesive Application: Apply a suitable silicone adhesive or strong double-sided tape specifically designed for glass splashbacks, following manufacturer instructions.
  4. Positioning: Carefully place the splashback onto the wall, ensuring it is level and aligned correctly.
  5. Securing: Press firmly to adhere. Allow the adhesive to cure fully as per product recommendations before use.

Compatibility:

  • Compatible with most standard kitchen wall surfaces, including plasterboard, tile, and painted walls, provided they are smooth and stable.
  • Ensure sufficient clearance around cooktops for heat dissipation.

Care:

  • Clean regularly with a soft, damp cloth and mild, non-abrasive detergent.
  • Avoid using harsh chemicals, scouring pads, or abrasive cleaners, as these can scratch the glass surface.
  • Wipe spills immediately to prevent staining or etching.