Rustins Raw Linseed Oil - 125ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Rustins Raw Linseed Oil, a natural wood treatment and lubricant. It's ideal for nourishing wood, softening putty, and is even used on cricket bats. A key benefit is its natural composition, but keep in mind that it requires proper application and curing time for optimal results.
All features
| Model Part Number | LINS125 |
|---|---|
| Brand | Rustins |
Extended Product Information
FAQs
How long does it take for Rustins Raw Linseed Oil to dry?
Typically, it takes 24 hours for each coat to dry, but drying times can vary depending on temperature, humidity, and ventilation. Ensure each coat is fully dry before applying another.
How many coats of Rustins Raw Linseed Oil should I apply?
For best results, apply multiple thin coats. The number of coats depends on the wood's absorbency and the desired finish. Two to three coats are often sufficient, but cricket bats may require more.
Can I use Rustins Raw Linseed Oil on painted surfaces?
No, it is not recommended. Rustins Raw Linseed Oil is designed for use on bare wood. Applying it over paint will not provide any benefit.
What should I do with the rags used to apply Rustins Raw Linseed Oil?
To prevent spontaneous combustion, lay the oil-soaked rags flat and allow them to dry completely outdoors before disposing of them safely.
Is Rustins Raw Linseed Oil safe to use indoors?
Yes, but ensure good ventilation during and after application, as the oil has a distinct odor. Open windows and doors.
Can I use Rustins Raw Linseed Oil on exterior wood?
Yes, but it is less weather-resistant than some other wood treatments. Reapplication will be required more frequently if exposed to the elements.
How should I store Rustins Raw Linseed Oil?
Store in a cool, dry place, away from direct sunlight and heat. Make sure the container is tightly sealed when not in use.
Troubleshooting
Oil is not drying properly.
Ensure the application is thin, and the room is well-ventilated. Excessive oil can cause slow drying. Wipe off any excess oil. Allow for adequate drying time between coats. Inadequate ventilation can also slow drying.
Surface feels sticky after application.
This indicates too much oil was applied. Wipe off the excess with a clean cloth. Allow the surface to dry completely. A thin application is key to preventing stickiness.
Oil has a strong odor.
Ensure adequate ventilation during and after application. The odor should dissipate as the oil dries.
Color change not as expected.
Raw Linseed Oil can slightly darken wood. Test on an inconspicuous area first. The final color depends on the wood type and the number of coats applied.
Pros and Cons
Pros
- Natural composition
- Effective for wood nourishment
- Acts as a lubricant for French polishing
- Softens old putty
- Specifically used for cricket bats
Cons
- Requires proper application techniques
- Needs curing time
- May not be suitable for all wood finishes
- Can attract dust if over-applied
Setup, Compatibility & Care
Setup
- Preparation: Ensure the wood surface is clean, dry, and free of any old finishes.
- Application: Apply a thin, even coat of Rustins Raw Linseed Oil using a soft cloth or brush.
- Wiping: Wipe off any excess oil after a few minutes.
- Drying: Allow the oil to dry completely before applying additional coats (typically 24 hours).
Compatibility
- Suitable for most types of unfinished wood.
- Test on an inconspicuous area before applying to the entire surface.
- Not recommended for use with existing finishes unless fully stripped.
Care
- Store in a cool, dry place.
- Keep container tightly sealed when not in use.
- Dispose of oil-soaked rags properly to prevent spontaneous combustion. Allow rags to dry outside before disposal.
- For general cleaning of treated surfaces, use a damp cloth.