Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide provides essential information for using Everbuild Triple Action Wood Treatment. It's designed for anyone needing to protect their wood from rot, decay, and insect damage. The key benefit is long-lasting protection with superior wood penetration, but note that it's important to follow application instructions for optimal results. This guide will cover key features, how to use it, and troubleshooting tips.
| Model Part Number | Evbljun01 |
|---|---|
| Brand | Everbuild |
The longevity of the treatment depends on environmental conditions and the type of wood. However, it provides long-lasting protection, typically lasting several years.
Yes, once the treatment is fully dry, you can paint or apply a topcoat. Always follow the paint manufacturer's instructions.
Avoid direct contact with plants. Cover plants and surrounding areas to protect them from overspray or drips.
Yes, it can be applied to wet timbers, though performance is optimized on drier wood. Ensure excess water is removed.
The coverage rate varies depending on the wood's porosity and the application method. Refer to the product label for specific details.
While the product is low-odor, it's recommended to wear a mask, gloves, and eye protection during application to avoid any irritation.
Store in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the container is tightly sealed.
Yes, Everbuild Triple Action Wood Treatment is suitable for use on decking to protect against rot and insect infestation.
Ensure the wood surface is properly prepared by sanding and cleaning. The wood must be free of existing coatings to allow the treatment to penetrate. If the wood is very dense, multiple coats may be required.
Apply the treatment evenly using a brush, following the grain of the wood. Avoid applying too much product in one area to prevent runs or drips. If necessary, wipe off excess product before it dries.
Ensure the wood was properly prepared before treatment. Heavily decayed wood may require more intensive treatment or replacement. Reapply the treatment following the manufacturer's instructions and monitor for further degradation.
Ensure proper ventilation during application and drying. The product is low-odor, but some odor may be present. Open windows and doors to allow for adequate air circulation. Use a respirator if necessary.
