Hisense Fridge Freezer - E



Currently unavailable



Currently unavailable
This Hisense Fridge Freezer - E is an ideal appliance for families or individuals seeking substantial storage space for fresh and frozen goods. Its key advantage lies in its generous 579L capacity and innovative No Frost technology, which eliminates the need for manual defrosting. While it provides convenient chilled water without plumbing, its large American-style dimensions require careful consideration for kitchen placement.
| Energy Efficiency | E |
|---|---|
| Model Part Number | RF749N4SWFE |
| Brand | Hisense |
'No Frost' means you will never have to manually defrost your fridge or freezer. The system automatically prevents ice crystals from forming, maintaining optimal performance and keeping your food fresher for longer.
Locate the water tank inside the fridge compartment (usually on the door). Remove the tank, fill it with fresh, potable water from your tap, and then securely reinsert it into its designated slot. Dispense a few glasses to ensure proper operation.
The product dimensions are 1785mm in height, 914mm in width, and 725mm in depth (1785 x 914 x 725 mm).
It has a total net capacity of 579 litres: 367 litres for the fridge and 212 litres for the freezer. This is equivalent to approximately 20 bags of fresh groceries and 12 bags of frozen items.
No special plumbing installation is required due to the non-plumbed water dispenser. However, ensure you have sufficient space for its large dimensions, and allow adequate ventilation around the unit. Basic electrical connection to a grounded outlet is all that's needed.
To clean the interior, unplug the appliance and remove all food items. Use a soft cloth with a mild detergent solution and warm water. Wipe down all surfaces, shelves, and drawers. Rinse with clean water and dry thoroughly before plugging it back in and reloading food.
Check if the temperature settings are correct. Ensure doors are fully closed and seals are intact. Verify there's enough space around the appliance for ventilation. Avoid overpacking, which can obstruct airflow. If issues persist, unplug for 15 minutes, then restart.
Ensure the water tank is filled with water. Check if the tank is correctly seated and assembled. Make sure no parts of the dispenser mechanism are blocked or dirty. If it's a new unit, dispense a few glasses to prime the system.
Check if the appliance is level on the floor, adjusting the feet if necessary. Ensure nothing is touching the back or sides of the unit, which could cause vibrations. Some operational noises like humming or gurgling are normal (e.g., refrigerant flow, compressor running).
While rare, this usually indicates a door seal issue allowing warm, moist air in. Inspect door seals for damage or debris and clean them. Also, avoid leaving doors open for extended periods. Ensure food items are not blocking the air vents inside.