Tough Master Tower Heater - 2000W
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tough Master Tower Heater is designed for individuals seeking a rapid and efficient way to warm spaces up to 20m². Its ceramic heating elements provide quick, quiet warmth, while convenient controls and portability enhance user experience. While highly effective for supplemental heating, it's optimized for individual rooms rather than serving as a primary heat source for an entire home.
All features
| Model Part Number | TM-TH220 |
|---|---|
| Brand | TOUGH MASTER |
Extended Product Information
FAQs
How large a room can this heater effectively warm?
The Tough Master Tower Heater is designed to efficiently warm rooms up to 20 square meters (215 square feet).
Can I use the remote control from anywhere in the room?
The remote control operates best with a clear line of sight to the heater's LED control panel. Its effective range typically covers a standard room.
Is it safe to leave the heater running overnight?
The heater includes built-in safety features like tip-over and overheating protection. While designed for safety, it's generally recommended to use the 8-hour timer for automatic shut-off or to turn off the appliance when leaving a room unattended for extended periods.
What is the purpose of the two heat settings?
The `1200W` setting provides a lower, more energy-efficient heat output for maintaining comfort, while the `2000W` setting offers maximum power for rapid heating or warming larger spaces within its recommended range.
How often should I clean the filter?
The filter should be cleaned regularly, especially during periods of frequent use or if you notice a decrease in heating performance. A general recommendation is every 2-4 weeks, depending on the environment.
Can this heater be used in a bathroom or other damp environments?
No, this heater is not rated for use in bathrooms, laundries, or any other areas with high humidity or where it could come into contact with water. This is crucial for electrical safety.
Troubleshooting
Heater will not turn on
First, ensure the power cord is securely plugged into a working electrical outlet. Check if the heater has been tipped over; the tip-over protection feature will prevent it from operating. Make sure the desired temperature setting is higher than the current room temperature, and the timer is not set to 'off'.
Insufficient heat output
Verify that the heater is set to the `2000W` high heat setting if maximum warmth is desired. Check the size of the room; the heater is optimized for spaces up to 20m². Ensure the air intake filter is clean, as a clogged filter can reduce heating efficiency. Close doors and windows to prevent heat loss.
Oscillation function is not working
Ensure the oscillation button on the control panel or remote has been pressed to activate the feature. Check for any obstructions around the base of the heater that might impede its rotation. If the issue persists, unplug the heater for a few minutes and then plug it back in to reset it.
Pros and Cons
Pros
- Rapid and efficient room heating for spaces up to 20m²
- Quiet operation suitable for bedrooms, offices, or living areas
- Even heat distribution via oscillation function
- Convenient remote and touch panel control options
- Enhanced safety features including tip-over and overheat protection
- Portable with a space-saving, slim design
Cons
- Best suited for supplemental heating in single rooms, not whole-house primary heat
- Requires a flat, stable surface for operation due to tip-over safety mechanism
- Higher power consumption at the 2000W setting may impact electricity bills
Setup, Compatibility & Care
Setup
Setting up your Tough Master Tower Heater is straightforward:
- Unpack: Carefully remove the heater from its packaging. Retain packaging for future storage if needed.
- Placement: Place the heater upright on a firm, level, non-flammable surface, ensuring at least `30cm` (1 foot) clearance from walls, furniture, and other objects.
- Plug In: Insert the power plug into a standard, grounded electrical outlet. Ensure the outlet can support a `2000W` appliance.
Compatibility
This heater is designed for use with standard household electrical outlets (e.g., `220-240V`, `50Hz`). It is not suitable for use in bathrooms or other high-humidity environments due to electrical safety risks.
Care & Maintenance
Regular care ensures optimal performance and longevity:
- Cleaning the Exterior: Disconnect the heater from the power supply. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or allow water to drip into the interior.
- Filter Maintenance: The accessible filter should be cleaned regularly, especially if the heater is used frequently or in dusty environments.
- Ensure the heater is unplugged and cool.
- Locate the filter on the back of the unit (Info needed: confirm filter location).
- Gently remove the filter cover and the filter.
- Clean the filter using a vacuum cleaner to remove dust or rinse it gently with water. Ensure it is completely dry before reinserting.
- Replace the filter and cover securely.
- Storage: When not in use, store the heater in a cool, dry place, ideally in its original packaging.