Q.Max Sheet Metal Punch - 19mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Q.Max 19mm Sheet Metal Punch is an essential tool for electricians, metalworkers, and DIY enthusiasts who need to create precise, clean holes in sheet metal up to 16 gauge. Its primary benefit is the ability to produce perfectly round, burr-free holes without the need for manual filing or finishing, significantly speeding up panel and enclosure installations. However, users should be aware that the punch is sold as a single unit and requires a separate hexagonal wrench for operation, and it does not include a tightening key in the package.
All features
| Model Part Number | 19mm |
|---|---|
| Brand | Q.Max |
Extended Product Information
FAQs
Does this package include a turning key?
No, the punch is sold as a single unit and does not include a key. You will need to source a separate tool or use an 8mm hexagonal wrench.
Can I use this on 12 gauge steel?
No, this punch is specifically rated for sheet metal up to 16 gauge. Using it on thicker material may damage the punch.
Do I need to file the edges after punching?
No, the Q.Max punch is designed to create a burr-free hole, meaning no secondary finishing is required.
What size pilot hole is required?
The pilot hole must be large enough to allow the hexagonal screw to pass through; typically, this is slightly larger than the diameter of the screw threads.
How do I prevent the punch from rusting?
The tool features a black anti-corrosive finish, but it is recommended to keep it in a dry, clean space and wipe it down with a light coat of oil if stored for long periods.
Troubleshooting
Punch is difficult to turn during operation
Apply a small amount of machine oil to the screw thread and ensure the punch is aligned perfectly square with the metal surface.
Metal is deforming instead of cutting
Verify that the material is not thicker than 16 gauge and check that the pilot hole size is appropriate for the screw diameter.
Punch seems dull after multiple uses
Inspect the cutting edges for buildup; clean thoroughly with a wire brush, but avoid abrasive grinding which may damage the heat-treated edges.
Pros and Cons
Pros
- Creates perfectly clean, burr-free holes
- Heat-treated edges provide excellent durability
- Simplified single-unit design for models 19mm and larger
- Rust-resistant anti-corrosive finish
- Highly efficient compared to traditional drilling or hole saws
Cons
- Key for tightening must be sourced separately
- Requires an 8mm hexagonal wrench to operate
- Limited to sheet metal up to 16 gauge
- Cannot be used on thicker hardened steel or materials beyond 16 gauge
Setup, Compatibility & Care
To ensure consistent results, always confirm that your sheet metal does not exceed the 16 gauge thickness limit. The punch is compatible with an 8mm hexagonal wrench.
Setup Steps:
- Drill a pilot hole in the metal sheet.
- Insert the punch assembly through the pilot hole.
- Tighten using an 8mm hexagonal wrench until the punch passes through the metal.
Care Instructions:
- Keep the threads lubricated to ensure smooth operation and prevent binding.
- Store the tool in a dry environment to maintain the integrity of the anti-corrosive coating.
- Clean debris and metal shavings from the cutting edges after each use to prolong the life of the heat-treated edges.