Pure Tung Oil - Brandon Bespoke

For optimal protection and durability, 3-5 thin coats are generally recommended. The number of coats can vary based on the wood type and its intended use. Always allow adequate drying time between coats.

While it may feel dry to the touch within 24-48 hours, full curing can take up to 30 days, especially in cooler or more humid conditions. It is food safe after full curing.

Yes, Brandon Bespoke's Pure Tung Oil is food safe once fully cured and is an excellent choice for wooden cutting boards and utensils, providing protection and enhancing the wood's natural beauty.

It is best applied to bare wood. If applied over existing finishes, it may not penetrate properly and could lead to adhesion issues. Old finishes typically need to be stripped before application.

Tung oil is a natural drying oil that penetrates the wood, offering a durable, water-resistant, and flexible finish that enhances the grain. Unlike film-forming finishes (like polyurethane), it doesn't typically create a thick surface layer and can be easily repaired.

Cloths saturated with Tung Oil can be a fire hazard when dry due to spontaneous combustion. Lay them flat to dry completely outdoors or soak them in water in a sealed metal container before disposal. Brushes can be cleaned with mineral spirits.

This usually indicates too much oil was applied or not enough excess was wiped off. Apply a clean cloth dampened with mineral spirits to the tacky area and wipe thoroughly. Allow to dry completely before applying another thin coat if needed.

Ensure the wood was properly prepared and sanded. Apply in thin, even coats and always wipe off excess oil. For very porous woods, a pre-sealer might be beneficial, or apply an extra thin coat after the initial application has dried.

Drying time is dependent on temperature, humidity, and ventilation. Ensure good airflow and a consistent temperature (ideally 65-75°F or 18-24°C). Avoid applying thick coats, as this significantly increases drying time.

Ensure multiple thin coats have been applied and allowed to cure fully. Tung oil builds protection over several layers. Reapplication may be necessary for heavily exposed surfaces.