A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cast iron, and galvanised metal. For interior and exterior use. Hazard Safety Codes: Xi, R36. Approx coverage: 14m² per litre. Quickly transform surfaces indoors and out, with this Rustins Quick Dry Metal Paint. It can be applied directly to the metal with no need for a primer, and dries to a smooth, satin finish in just two hours. This white paint is suitable for bare metal, cast iron and galvanised metal. It's a water-based, low-odour formula that contains anti-corrosion additives - two coats will give you adequate coverage, while a third coat will really improve durability.* Coverage of up to 14m² per litre* Touch-dry in just 30 hours* Recoatable in just 2 hours* Two coats for adequate coverage* Three coats recommended for improved durability* Suitable for interior and exterior use* For use on bare and galvanised metal* Can be applied directly with no need for primer* Not suitable for use under cellulose finishes* Water-based, low-odour formula* Dries to a smooth satin finish* 500ml tin - total coverage of up to 7m² Rustins Quick Dry Metal Paint Smooth Satin 500ml in White Iron Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. Based upon high quality water-borne cross linking acrylic resin.It can be applied directly without the use of a primer and is suitable for indoor and outdoor use.Ideal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours.Brushes can be cleaned with water. PLEASE NOTE:All items will be shipped and delivered by the following services: Evri,\n DX, DHL and Royal Mail. The service used is dependent on location of \ndelivery, weight of parcel, size of parcel, value of contents and \ncarrier restrictions of transport.\nRustins new formula Quick Dry Metal Paint Black is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. \nIdeal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water.  \nType: Based on high quality water-borne cross linking acrylic resin. Intended Use: A protective and decorative finish for bare metal, cast iron, and galvanised metal. Special Features: No primer required, low odour, low VOC and quick drying. For inte;