nVent ERIFLEX Distribution Terminal Block - 80A - 16mm² - Blue
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This nVent ERIFLEX distribution terminal block is designed for electricians and industrial professionals needing a reliable single-pole power distribution solution. Its key benefit is providing a safe and efficient way to connect multiple conductors up to 80A with a 16mm² cross-section. A potential caveat is its specific DIN rail mounting requirement for optimal installation.
All features
| Model Part Number | 569010 |
|---|---|
| Brand | nVent ERIFLEX |
Extended Product Information
FAQs
What is the maximum current rating for this terminal block?
The maximum current rating for this nVent ERIFLEX distribution terminal block is 80A.
What is the maximum conductor size this block can accept?
It can accept a conductor cross-section of up to 16mm² and is compatible with AWG 6 wire size.
Can I use this block with both copper and aluminum wires?
Yes, the tinned copper block allows for direct connections with copper or aluminum conductors, or by using a ferrule.
How is this terminal block typically mounted?
It is designed for easy clipping onto a standard DIN rail. It can also be mounted to a panel using screws.
What is the voltage rating?
The terminal block is rated for 1000 V (1 kV).
What does the '1-pole' designation mean?
A 1-pole designation means the block is designed to connect a single electrical circuit or conductor path.
Can I combine multiple blocks?
Yes, the modular design allows for snap-together blocks to build multi-pole power distribution units.
What certifications does this product have?
This product is certified for RoHS and CE compliance.
Troubleshooting
Terminal block not holding conductor securely.
Ensure the conductor is stripped to the correct length and inserted fully into the terminal. Tighten the screw firmly, but avoid overtightening which could strip the threads. Verify the conductor size is within the specified range (up to 16mm²).
Overheating at connection point.
Check that the conductor size is appropriate for the terminal. Ensure the screw is tightened correctly. Verify that the current draw does not exceed the 80A rating. Clean any contaminants from the connection point.
Difficulty mounting to DIN rail.
Ensure you are using a standard 35mm width DIN rail. Check for any obstructions on the rail or the mounting mechanism of the terminal block. The block should slide and click into place.
Pros and Cons
Pros
- Robust construction with thermoplastic housing for durability.
- Supports both copper and aluminum conductors directly or with ferrules.
- Allows for easy visual inspection of connections.
- Modular design enables custom multi-pole configurations.
- Designed for quick and secure DIN rail mounting.
- High voltage rating of 1 kV for safety.
Cons
- Primarily designed for DIN rail mounting, may require adapters for other mounting methods.
- Single-pole design requires multiple units for multi-phase applications.
- Limited to 16mm² conductor cross-section for the main termination.
- Specific model has a fixed number of 7 connections.
Setup, Compatibility & Care
Setup:
- Ensure the power source is de-energized before installation.
- Mount the terminal block securely onto a standard 35mm DIN rail or use screws for panel mounting.
- Prepare the conductors according to the maximum conductor cross-section of 16mm² or AWG 6.
- Insert the conductor into the screw clamp terminal and tighten the screw firmly to secure the connection.
- Repeat for all desired connections.
Compatibility:
- Compatible with copper and aluminum conductors.
- Designed for DIN rail mounting.
- Suitable for use in systems with a voltage rating up to 1000 V.
- Meets RoHS and CE compliance standards.
Care:
- Keep the terminal block clean and free from dust and debris.
- Periodically inspect connections for tightness, especially in environments with vibration.
- Do not exceed the maximum current (80A) or conductor cross-section (16mm²) ratings.