Streetwize 6 Amp Automatic Battery Charger - LED Indicator
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Streetwize 6 Amp Automatic Battery Charger. It helps you keep your car, motorcycle, or lawnmower batteries charged and ready to go, especially in emergencies. A key benefit is its automatic operation and safety features, but note that it's designed for lead-acid batteries and has a capacity range of 8Ah to 80Ah.
All features
| Model Part Number | SWBCLED6 |
|---|---|
| Brand | Streetwize |
Extended Product Information
FAQs
What type of batteries is this charger compatible with?
The Streetwize 6 Amp Automatic Battery Charger is compatible with 6V and 12V lead-acid batteries.
What is the charging rate?
The charging rate is 3.5 Adc, equal to 6 Amps RMS.
What battery capacity is suitable for this charger?
The charger is suitable for batteries with a capacity between 8Ah and 80Ah.
Does the charger have any safety features?
Yes, it has overheat, overload, reverse polarity, and short circuit protection.
Does the charger automatically stop charging?
Yes, it switches to maintenance/trickle charge mode when the battery is near full capacity.
How do I know when the battery is fully charged?
The LED indicator lights will show the charging status.
Can I leave the charger connected to the battery for a long time?
Yes, once the battery is fully charged, the charger automatically switches to a maintenance mode, allowing it to be connected for extended periods.
Where should I store the charger?
Store the charger in a dry, cool place.
Troubleshooting
Charger doesn't turn on.
Check if the charger is properly plugged into a working power outlet. Ensure the power outlet is functioning.
Battery is not charging.
Check the connections to the battery terminals. Make sure they are secure and correctly connected (red to positive, black to negative). Also, verify the battery capacity is within 8Ah - 80Ah.
LED indicator shows an error.
Consult the user manual for the specific error indication. It may indicate reverse polarity or a short circuit. Check connections and battery condition.
Charger is getting hot.
This is normal, but ensure adequate ventilation around the charger. If it overheats, disconnect the charger and allow it to cool before further use. Check for any obstructions around the charger.
Pros and Cons
Pros
- Automatic operation makes it easy to use.
- Protects against overcharging and short circuits.
- Suitable for various lead-acid battery types.
- Compact and portable design.
- LED indicators provide clear status updates.
- Offers both 6V and 12V charging options.
Cons
- Only compatible with lead-acid batteries.
- Limited to batteries within 8Ah - 80Ah capacity range.
- Charging rate of 3.5 Adc (6 Amps RMS) may be slow for large batteries.
- Does not have advanced battery diagnostic features.
- May not be suitable for all battery types.
Setup, Compatibility & Care
- Connecting the Charger:
- Ensure the charger is unplugged from the power outlet.
- Connect the red clamp to the positive (+) terminal of the battery.
- Connect the black clamp to the negative (-) terminal of the battery.
- Plugging in the Charger: Plug the charger into a standard power outlet.
- LED Indicators: Observe the LED indicators for charging status.
Compatibility:
- This charger is designed for 6V and 12V lead-acid batteries.
- It is suitable for batteries with capacities between 8Ah and 80Ah.
Care:
- Store the charger in a dry, cool place when not in use.
- Clean the charger with a dry cloth; avoid using solvents.
- Check the cables and clamps for any damage before each use.
- Do not disassemble or attempt to repair the charger.