Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The OB1 Multi-Surface Grip & Grab Adhesive 290ml (24 Pack) is designed for trade professionals and DIYers who need a strong, fast-bonding adhesive for a wide range of applications. Its key benefit is the high-strength, instant grab performance combined with a weatherproof formula, reducing the need for immediate support. A potential caveat is that its fast-setting nature requires careful application planning.
| Brand | OB1 |
|---|
While it offers an instant grab, full curing typically takes 24-48 hours, depending on temperature, humidity, and bead size. Refer to the product packaging for specific cure times.
It provides high-strength bonding and instant grab, which is excellent for many applications. For extremely heavy items, additional mechanical fixings might still be advisable, especially during the initial curing period.
It is generally compatible with most surfaces, but for painted surfaces, it is recommended to test on a small, inconspicuous area first to ensure compatibility and adhesion.
Store in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the nozzle is sealed or capped to prevent the adhesive from curing within the cartridge.
The adhesive can bridge small gaps due to its viscosity, but it is not designed as a gap filler. For larger gaps, a dedicated filler product would be more appropriate.
Optimal application temperatures are typically between 5°C and 30°C. Avoid applying in extreme cold or heat, as this can affect performance and curing.
Check that the cartridge is properly seated in the gun and that the nozzle tip and inner seal have been correctly opened.
Ensure surfaces are properly prepared (clean, dry, free from dust and grease) and that the adhesive has been applied evenly to at least one surface. Verify the product has not expired.
Ensure the sealant gun's trigger is released after each application and that the nozzle tip is cut to an appropriate size. Clean up uncured adhesive immediately.
Apply adhesive in manageable sections. For larger areas, consider using two people for positioning.
Setup:
Compatibility:
This adhesive is designed for multi-surface bonding and is generally compatible with:
Ensure surfaces are clean, dry, and free from dust, grease, or any loose material before application. For non-porous surfaces, apply to one side and press firmly into place.
Care:
