Smartseal Textured Wall Coating - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking to protect and beautify masonry walls using Smartseal Textured Wall Coating in Grey. The coating provides a durable, waterproof, and breathable finish that lasts up to 15 years, preventing water ingress while allowing the substrate to 'breathe'. Keep in mind that proper surface preparation is crucial for optimal performance.
All features
| Colour | Grey |
|---|---|
| Brand | Smartseal |
Extended Product Information
FAQs
What surfaces can I use Smartseal Textured Wall Coating on?
It is suitable for brickwork, stone, concrete, and rendered walls, both internally and externally.
How long does the coating last?
Up to 15 years, depending on the conditions and preparation.
Is the coating breathable?
Yes, it allows the substrate to breathe, preventing damp and moisture build-up.
Is it easy to apply?
Yes, it has a thick viscosity that makes it easy to apply with a brush, roller, or spray.
Is it safe to use indoors?
Yes, it is solvent-free, non-toxic, and low odour, making it ideal for both internal and external use.
How long does it take to dry?
It takes approximately 24-48 hours to fully cure.
What colors are available?
It is available in 46 popular color shades.
Can I pressure wash the coated surface?
It is recommended to clean the surface with water and a mild detergent. Avoid using abrasive cleaners or pressure washing.
Troubleshooting
Coating is peeling or flaking.
Ensure the surface was properly prepared. Remove loose paint and apply a new coat.
Coating is not adhering properly.
Make sure the surface is clean and dry before application. Consider using a primer if necessary.
Color is uneven.
Apply a second coat to ensure even coverage.
Coating shows cracks.
Check surface for movement, ensure the surface is dry and free from any contaminants. Ensure the coating has fully cured.
Pros and Cons
Pros
- Long-lasting protection against the elements.
- Prevents damp and moisture buildup.
- Flexible formula resists cracking.
- Easy application due to thick viscosity.
- Suitable for a wide range of masonry surfaces.
- Low odor and environmentally friendly.
Cons
- Requires proper surface preparation for optimal results.
- Curing time of 24-48 hours.
- Color selection limited to available shades.
- May require multiple coats for complete coverage.
- Textured finish may not be desired by all users.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and any previous coatings. Use a suitable cleaner to remove any existing contaminants. Any existing mold or mildew should be treated with a dedicated solution.
- Application: Apply the coating with a brush, roller, or spray. Apply multiple coats if necessary, allowing each coat to dry completely.
- Drying Time: Allow 24-48 hours for full curing. Avoid exposing the coated surface to heavy rain or extreme temperatures during the curing process.
- Compatibility: Compatible with most masonry surfaces, including brickwork, stone, concrete, and render. Not recommended for use on surfaces not intended for masonry coatings.
- Care: Clean the coated surface with water and a mild detergent. Avoid using abrasive cleaners or pressure washing, which can damage the coating.