Anest Iwata Series 2.1 WS-400 Digital Spray Gun - 13HD Clearcoat - 130194A1-IWA
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Anest Iwata Series 2.1 WS-400 Digital Spray Gun is a professional-grade precision tool designed for automotive and industrial painters who demand superior clearcoat finishes. By integrating a built-in digital pressure gauge, it empowers users to achieve consistent coating builds and repeatable results across high-performance applications; however, its advanced technical design requires a dedicated maintenance routine and a firm grasp of spray dynamics to prevent clogging and ensure longevity.
All features
| Model Part Number | 130194A1-IWA |
|---|---|
| Brand | Anest Iwata |
Extended Product Information
FAQs
Is this spray gun suitable for basecoats?
The 13HD configuration is specifically optimized for clearcoat applications, though it may be used for other materials depending on your specific requirements and viscosity.
Can the digital gauge be submerged in cleaning solvent?
No, you should never submerge the gauge assembly in solvent as it will damage the internal electronic components.
What air pressure should I start with?
Refer to your specific clearcoat manufacturer's technical data sheet, then adjust using the digital gauge for precision.
Does this gun include a cup?
Please verify your specific package contents, as the 130194A1-IWA model may or may not include a cup depending on the distributor's kit configuration.
How often should I lubricate the gun?
Apply a small amount of non-silicone lubricant to the needle packing and trigger pivot point after every thorough cleaning.
Troubleshooting
Digital gauge not illuminating or displaying data
Check the battery compartment for proper contact or replace the battery if the display remains blank.
Spray pattern is fluttery or uneven
Inspect the air cap for dried material buildup and ensure the fluid nozzle is tightened correctly.
Fluid leaking from the needle packing area
Gently tighten the needle packing nut or replace the packing seal if wear is present.
Pros and Cons
Pros
- Precise digital pressure management
- Optimized 13HD nozzle for superior clearcoat flow
- Ergonomic balance reduces physical strain
- Highly consistent spray pattern for reduced rework
- Professional-grade build quality
Cons
- Requires professional-level setup expertise
- High investment cost for non-commercial users
- Requires meticulous cleaning to maintain performance
- Limited to specific high-performance clearcoat applications
Setup, Compatibility & Care
To ensure peak performance, the WS-400 must be connected to an air supply free of oil and water contamination; the use of a high-quality air filter regulator is mandatory. Before first use, verify that the fluid nozzle and needle are properly seated. For maintenance, never soak the entire digital gauge assembly in solvent, as this may damage the internal electronics. Instead, clean the fluid nozzle and air cap immediately after each use using a soft brush and approved cleaning solution. Periodically lubricate the needle spring and packing with air-gun-safe lubricant to ensure a smooth trigger pull.