Schneider Electric Terminal Shield - LV429515
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Schneider Electric LV429515 Terminal Shield is designed for electricians and maintenance professionals working with 3-pole Compact NSX 100/160/250 or EasyPact CVS 100/160/250 circuit breakers. Its primary benefit is to provide essential protection against direct contact with the power circuit, enhancing safety and ensuring compliance with IEC 60947-2 standards. A potential consideration is its specific compatibility, as it's intended for a defined range of Schneider Electric devices.
All features
| Model Part Number | LV429515 |
|---|---|
| Brand | Schneider Electric |
Extended Product Information
FAQs
What is the primary purpose of the LV429515 terminal shield?
The primary purpose is to prevent direct contact with the live terminals of compatible Schneider Electric circuit breakers, thereby enhancing electrical safety and helping to meet safety standards like IEC 60947-2.
Which circuit breaker models is this terminal shield compatible with?
It is compatible with 3-pole Schneider Electric Compact NSX 100, 160, and 250, as well as EasyPact CVS 100, 160, and 250 circuit breakers.
Can I mount this shield on either side of the circuit breaker?
Yes, the short terminal shield can be mounted both upstream and downstream of the fixed, plug-in, or withdrawable devices it is intended for.
Is this product environmentally hazardous?
No, this product is designed to be toxic heavy metal-free and mercury-free.
What tools are needed for installation?
Typically, no specialized tools are required. The shield is designed to clip or snap into place. Basic safety procedures, including de-energizing the circuit, are essential.
Does this shield offer protection against dust or moisture?
The primary function of this terminal shield is protection against direct electrical contact. It does not provide sealing against dust or moisture ingress on its own.
Where can I find the installation instructions?
Detailed installation instructions are usually found within the product packaging or can be accessed via the Schneider Electric technical documentation portal using the model number LV429515.
Troubleshooting
Terminal shield does not fit securely.
Verify that you are using the correct shield model for your specific circuit breaker (NSX or CVS series, correct amperage range). Ensure no debris is obstructing the mounting points on the breaker or shield. Re-read the installation instructions for proper alignment.
Difficulty in mounting the shield.
Confirm the circuit breaker is correctly installed and stable. Ensure the power is off. If the shield feels forced, check for any obstructions or misalignments. Consult the product's installation manual for specific mounting techniques.
Shield appears damaged or cracked.
Do not use a damaged terminal shield. Immediately replace it with a new, compatible shield to ensure safety and compliance. Contact your supplier for a replacement if it is a new product.
Pros and Cons
Pros
- Enhances safety by preventing direct contact with live terminals.
- Aids in meeting strict electrical safety compliance standards (IEC 60947-2).
- Offers flexible installation options (upstream and downstream).
- Specifically designed for seamless integration with compatible Schneider Electric breakers.
- Environmentally friendly material composition.
Cons
- Limited compatibility; only suitable for specified NSX and CVS models.
- Requires careful installation to ensure proper fit and function.
- Does not provide protection against environmental ingress (dust, moisture) unless combined with other protective measures.
Setup, Compatibility & Care
Setup:
- Ensure the power supply to the associated circuit breaker (Compact NSX 100/160/250 or EasyPact CVS 100/160/250) is de-energized and locked out.
- Position the terminal shield according to the installation diagram, either upstream or downstream of the breaker.
- Secure the shield using the appropriate mounting mechanisms for the specific breaker model. This typically involves snapping or clipping it into place.
- Verify the shield is firmly attached and covers the intended terminals completely.
Compatibility:
- Primary Compatibility: Schneider Electric Compact NSX 100, NSX 160, NSX 250 circuit breakers.
- Secondary Compatibility: Schneider Electric EasyPact CVS 100, CVS 160, CVS 250 circuit breakers.
- Note: This accessory is not designed for other brands or different models of Schneider Electric circuit breakers.
Care:
- Cleaning: Periodically wipe the terminal shield with a dry or slightly damp cloth to remove dust. Avoid using solvents or abrasive cleaners.
- Inspection: Regularly inspect the shield for any signs of damage, cracks, or loose fittings. Replace if compromised.
- Environment: While the material is robust, avoid exposing the shield to extreme conditions not within its design parameters.