Danfoss SET1E Electronic Timeswitch - 087N654000
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Danfoss SET1E Electronic Timeswitch is designed for homeowners and building managers seeking simple, reliable control over their heating or lighting schedules. Its key benefit is straightforward 24-hour programming, allowing for easy customization of 'On', 'Off', or 'Timed' modes. A potential caveat for some users might be its single-channel nature, meaning it controls one circuit. This timeswitch offers a user-friendly interface with an LED status indicator for clear operational feedback.
All features
| Model Part Number | 087N654000 |
|---|---|
| Brand | Danfoss |
Extended Product Information
FAQs
What is the main function of the Danfoss SET1E?
The Danfoss SET1E is an electronic timeswitch used to automatically control electrical devices, such as heating systems or lighting, by switching them on or off according to a programmed 24-hour schedule.
Can I program different schedules for weekdays and weekends?
No, the SET1E is a 24-hour timeswitch, meaning it operates on a single daily cycle. It does not support separate programming for weekdays and weekends.
What does the LED status indicator show?
The LED indicator typically shows the current operating state of the timeswitch. For example, it might be lit when the connected load is switched on and off when it is switched off.
How do I set the time on the Danfoss SET1E?
The timeswitch usually features a rotating dial or buttons to set the current time of day, which is crucial for the programmed schedule to function correctly.
What are the 'Off', 'Timed', and 'On' modes?
'Off' mode disables the connected device. 'Timed' mode activates the device according to the programmed schedule. 'On' mode keeps the device permanently active, overriding the schedule.
Is this timeswitch suitable for controlling multiple heating zones?
No, the SET1E is a single-channel timeswitch and can only control one circuit or device at a time. For multiple zones, you would need multiple units or a multi-channel timeswitch.
What is the weight of the Danfoss SET1E?
The Danfoss SET1E Electronic Timeswitch weighs approximately 2.2 Pounds.
Troubleshooting
Timeswitch does not power on.
Verify that the unit is correctly wired and connected to a live power supply. Check the circuit breaker for the connected circuit. Ensure the power supply voltage matches the unit's requirements.
Programmed schedule is not working.
Double-check the programmed 'On' and 'Off' times for accuracy. Ensure the unit is set to 'Timed' mode and not 'On' or 'Off' permanently. Confirm the current time is correctly set on the 24-hour dial.
LED indicator is off or incorrect.
If the LED is off when it should be on, check the load connection and ensure the appliance is drawing power. If the LED is on but the appliance is not active, verify the unit is in 'Timed' or 'On' mode and the schedule is active.
Unit feels warm during operation.
A slight warmth is normal, especially under load. If the unit becomes excessively hot, immediately disconnect power and have it inspected by a qualified electrician, as this could indicate an overload or internal fault.
Pros and Cons
Pros
- Simple and intuitive programming for daily schedules.
- Reliable electronic control for consistent operation.
- Clear LED indicator for operational status.
- Versatile 'Off', 'Timed', 'On' modes offer flexibility.
- Cost-effective solution for basic scheduling needs.
Cons
- Single-channel operation limits control to one circuit.
- Lacks advanced features like holiday modes or Wi-Fi connectivity.
- Programming might require initial familiarization for some users.
- Limited to 24-hour cycles; no weekly programming options.
- Weight of 2.2 Pounds is relatively high for a simple timeswitch.
Setup, Compatibility & Care
Setup: Installation of the Danfoss SET1E Electronic Timeswitch should be performed by a qualified electrician to ensure safety and compliance with electrical regulations. The unit connects to the electrical system to control a designated appliance or circuit. Ensure the power supply is disconnected before commencing any installation work.
Compatibility: This timeswitch is designed for controlling standard 240V AC circuits commonly used for heating systems and lighting. Always verify the load requirements of the connected device do not exceed the timeswitch's rating. It is compatible with single-channel applications.
Care: To maintain optimal performance, clean the exterior of the timeswitch periodically with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure ventilation around the unit is not obstructed. No user-serviceable parts are inside; do not attempt to open the unit.