Oil Filled Radiator - Blackspur - 1.5Kw 7 Fin Slim



Currently unavailable



Currently unavailable
This Blackspur 1.5kW oil-filled radiator is for anyone needing reliable, supplementary heating in small to medium-sized rooms like bedrooms, studies, or offices. Its key benefit is providing steady, even warmth with customizable temperature control. A potential caveat is its suitability primarily for supplemental heating rather than rapidly warming very large spaces. Key features include three heat settings, an adjustable thermostat, a 7-fin design for efficient heat distribution, and convenient features for storage and portability.
| Model Part Number | 1.5Kw 7 Fin Slim |
|---|---|
| Brand | Blackspur |
The time it takes to heat a room depends on the room's size, insulation, ambient temperature, and the selected heat setting. For best results, use it in small to medium-sized rooms and allow it some time to warm up.
This radiator is best suited for supplementary heating or for warming smaller, well-insulated spaces. For larger areas or very cold conditions, it may be more effective when used alongside a primary heating system.
The oil used in these radiators is a specially sealed thermal fluid. The unit is designed to prevent leaks, and the oil itself is not intended to be accessible or hazardous under normal operating conditions.
Unplug the radiator, allow it to cool completely, and then clean it. Use the integrated cord storage feature to neatly coil the power cord. Store it in a dry place, ideally in its original packaging or a protective cover, ensuring it is upright.
The radiator has three settings: 600W, 900W, and 1500W. The power consumption will vary depending on the setting you choose. The 1500W setting uses the most electricity.
The radiator is designed for continuous operation, and the thermostat helps maintain a set temperature efficiently. However, as with any heating appliance, exercise caution and ensure it is placed safely away from flammable materials and is not covered.
Check that the power cord is securely plugged into a functioning electrical outlet. Ensure the thermostat is set to an active position and the chosen heat setting is engaged.
Verify that the unit is plugged in and powered on. Check the thermostat setting to ensure it is calling for heat (set higher than the ambient room temperature). Confirm that a heat setting (600W, 900W, or 1500W) has been selected.
Ensure the radiator is placed on a level surface and is not obstructed. Allow sufficient time for the heat to circulate within the room. Keep doors and windows closed to retain warmth.
Immediately turn off and unplug the radiator. Check for any obstructions blocking the fins or vents. If the problem persists, discontinue use and contact customer support.
Setup:
Compatibility:
Care: