Laser Extra Deep Impact Socket - 24mm - 1/2" Drive
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 24mm extra deep impact socket from Laser Tools is designed for professionals and DIYers needing to access and tighten fasteners in deep or recessed applications using air/electric impact guns or drivers. Its key benefit is providing extended reach and secure engagement for efficient work, though its specific 24mm size means it's best suited for applications requiring that particular dimension. Key features include its extra-deep 120mm length, single hex design, 1/2" drive, and durable chrome vanadium construction with a corrosion-resistant black phosphate finish.
All features
| Model Part Number | 7770 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What is the main advantage of the extra deep design?
The 120mm extra depth allows the socket to reach and engage fasteners that are deeply recessed or located far down a threaded rod, which standard sockets cannot access.
Is this socket suitable for use with a breaker bar?
While it can be used with a breaker bar for manual turning, it is specifically designed and optimized for use with air/electric impact guns or impact drivers due to its impact-rated construction.
How does the single hex design benefit me?
The single hex (6-point) design grips the fastener on more sides than a double hex (12-point) socket, providing a stronger, more secure grip and significantly reducing the risk of rounding off the corners of the bolt head or nut.
What is the black phosphate finish for?
The black phosphate finish provides a protective layer that enhances the socket's resistance to corrosion and rust, thereby extending its lifespan.
Can I use this socket with any ratchet?
This is a 1/2" drive impact socket, designed primarily for 1/2" drive impact tools. While it might fit onto a 1/2" drive ratchet, it's best suited for impact tools to leverage its full capabilities and durability.
What other sizes are available in this extra deep range?
Laser Tools offers a range of extra deep sockets from 10mm to 32mm. This specific guide focuses on the 24mm size.
How should I clean the socket after use?
Wipe the socket with a dry or slightly damp cloth. Avoid using aggressive solvents. For best results, ensure it is dry before storing.
Troubleshooting
Socket does not fit impact wrench securely
Ensure you are using a 1/2" drive impact wrench and that the socket's drive opening is clear of debris. Check if the impact wrench's anvil is damaged or worn.
Socket slips on fastener head
Verify that the fastener is indeed a standard hex head and that the socket size (24mm) is correct for the fastener. Ensure the socket's internal hex is not excessively worn. Clean both the socket and fastener head.
Socket shows signs of rust or corrosion
Clean the affected area with a wire brush and apply a light coat of oil to the exterior. Store the socket in a dry place to prevent further corrosion.
Difficulty accessing a recessed fastener
Confirm that the 120mm depth is sufficient for the specific application. Ensure no obstructions are preventing the socket from seating fully onto the fastener.
Pros and Cons
Pros
- Excellent for accessing hard-to-reach fasteners due to its extra depth.
- Single hex design offers a secure grip, minimizing fastener damage.
- Durable chrome vanadium construction ensures a long service life.
- Black phosphate finish provides effective corrosion resistance.
- Directly compatible with standard 1/2" drive impact tools.
Cons
- Specific 24mm size limits its application to fasteners of that exact dimension.
- Extra depth may be unnecessary for many standard applications, making it bulkier than required.
- Requires an impact wrench or driver for full benefit; less effective with standard ratchets for deep fasteners.
- The black phosphate finish can potentially transfer onto hands or surfaces if not handled carefully.
Setup, Compatibility & Care
Setup and Compatibility:
This socket is designed for immediate use with any standard 1/2" drive impact wrench or impact driver. Ensure your impact tool's drive anvil is clean and free of debris. Simply attach the socket to the tool's drive anvil until it clicks or seats firmly. No special setup is required beyond connecting it to your impact tool.
Care Instructions:
- Cleaning: After use, wipe the socket clean with a dry or slightly damp cloth to remove dirt, grease, or metal shavings. Avoid using harsh solvents that could damage the phosphate finish.
- Storage: Store the socket in a dry environment to prevent corrosion. A toolbox or socket organizer is ideal. For long-term storage, a light application of oil can provide extra protection against rust, especially in humid conditions.
- Inspection: Periodically inspect the socket for any signs of excessive wear or damage. If the hex openings appear deformed or excessively worn, the socket should be replaced to avoid damaging fasteners.