Skip19B Spray Adhesive - 500ml - Stikatak
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Stikatak's Skip19B Spray Adhesive, a general-purpose adhesive designed for various applications. The key benefit is its ease of use and effectiveness in bonding a wide range of materials. A caveat is that it's not suitable for expanded polystyrene or vinyls. This guide covers key features, usage instructions, troubleshooting, and frequently asked questions to help you get the most out of your Skip19B Spray Adhesive.
All features
| Model Part Number | Skip19B |
|---|---|
| Brand | Stikatak |
Extended Product Information
FAQs
What materials can I use Skip19B on?
You can use Skip19B on felt and foam-backed carpets, underlays, tiles, foam, floor lining paper, textiles, fabrics, wood, stone, tiles, and concrete.
Can I use it on expanded polystyrene or vinyls?
No, Skip19B is not suitable for use with expanded polystyrene or vinyls.
How much area does one can cover?
A 500ml can provides approximately 3 m2 of coverage.
How should I store the adhesive?
Store in a cool, dry place and avoid extreme temperatures.
What should I do if the nozzle clogs?
Clean the nozzle with a suitable solvent. Invert the can and spray for a few seconds after each use.
Is Skip19B environmentally friendly?
Yes, Skip19B is DCM and CFC free.
How long should I wait before bonding the surfaces?
Allow the adhesive to become tacky before joining the surfaces. This usually takes a few minutes, depending on environmental conditions.
What surfaces should I prepare before applying the adhesive?
Ensure the surfaces are clean, dry, and free from dust, grease, or any contaminants.
Troubleshooting
Adhesive not sticking properly.
Ensure surfaces are clean and dry. Apply a more even coat of adhesive and allow it to become tacky before bonding. Check the compatibility of the materials.
Nozzle clogging.
Clean the nozzle with a solvent suitable for the adhesive. Invert the can and spray for a few seconds after each use.
Poor coverage.
Ensure you are spraying the adhesive evenly and at the correct distance from the surface (6-8 inches). Overlap passes to ensure full coverage. Consider applying a second coat.
Pros and Cons
Pros
- Easy to apply with aerosol spray.
- Effective bonding for various materials.
- Environmentally friendly formula (DCM and CFC free).
- Suitable for a wide range of applications.
- Provides good coverage per can.
Cons
- Not suitable for use with expanded polystyrene.
- Not recommended for use with vinyls.
- Coverage can vary based on the surface and application method.
- Requires proper ventilation during application.
- May require multiple coats for certain materials.
Setup, Compatibility & Care
- Preparation: Ensure the surfaces to be bonded are clean, dry, and free from dust or grease.
- Application: Shake the can well before use. Hold the can approximately 6-8 inches from the surface and spray evenly.
- Bonding: Apply adhesive to both surfaces and allow to become tacky before joining. Press firmly together.
- Compatibility: Compatible with felt and foam-backed carpets, underlays, tiles, foam, floor lining paper, textiles, and fabrics to wood, stone, tiles, and concrete.
- Care: Store in a cool, dry place. Avoid extreme temperatures. Ensure the nozzle is clean after each use to prevent clogging.