Audio Pro SW-10 - White
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Audio Pro SW-10 is a premium passive subwoofer designed to enhance your home entertainment experience by providing deep, punchy bass for music and movies. It's ideal for users looking to add impactful low frequencies to their existing stereo speaker setup, such as Audio Pro's A26 or A36 models. While it offers efficient power and clear sound through its Class D DSP amplifiers, users should note it requires a separate amplifier to power it.
All features
| Colour | White |
|---|---|
| Series | SW-10 |
| Model Part Number | SW10BK |
| Brand | Audio Pro |
Extended Product Information
FAQs
What is a passive subwoofer?
A passive subwoofer does not have a built-in amplifier and requires an external amplifier (like the one in your AV receiver or stereo system) to power it. The SW-10 is a passive model.
Do I need a separate amplifier for the SW-10?
Yes, as the SW-10 is a passive subwoofer, you will need an external amplifier or receiver with sufficient power output to drive it.
What is the power output of the SW-10?
The Audio Pro SW-10 has a Subwoofer RMS power of 200 W.
What is the frequency range of the SW-10?
The subwoofer's frequency range is 33 Hz to 120 Hz.
Can I connect the SW-10 to any stereo system?
The SW-10 can be connected to any stereo system or AV receiver that has an RCA line-out or subwoofer pre-out connection and can power a passive subwoofer.
How do I connect the SW-10 to my system?
Connect the subwoofer using an RCA cable from your amplifier's subwoofer pre-out or line-out to the RCA input on the SW-10.
What are the dimensions of the SW-10?
The SW-10 measures 28 cm in width, 29.5 cm in depth, and 28 cm in height.
Troubleshooting
No bass output
Verify that the subwoofer is properly connected to an active amplifier and that the amplifier is powered on. Check that the volume on both the amplifier and the subwoofer (if applicable) is turned up. Ensure the correct input is selected on the amplifier.
Humming or buzzing sound
Check all cable connections for a secure fit. Try a different RCA cable. Ensure the subwoofer is not placed too close to other electronic devices that might cause interference. Verify the power outlet is grounded.
Distorted sound at higher volumes
This could indicate the amplifier is being overdriven or the subwoofer is exceeding its power handling capacity. Reduce the volume and ensure the amplifier is appropriately matched to the subwoofer's power requirements.
Pros and Cons
Pros
- Provides significant bass depth for immersive audio.
- Complements existing stereo systems effectively.
- Class D DSP amplifiers ensure sound clarity and efficiency.
- Robust build quality typical of premium audio products.
Cons
- Requires a separate amplifier to function (passive subwoofer).
- May be overkill for small rooms or those preferring subtle bass.
- Limited to RCA line input for connection.
Setup, Compatibility & Care
Setup: Connect the SW-10 to your amplifier or receiver using an RCA cable. Ensure your amplifier has a dedicated subwoofer output or a pre-out connection. Position the subwoofer in your room, typically on the floor, and experiment with placement to find the optimal bass response. For best results, consult your amplifier's manual for subwoofer connection guidelines.
Compatibility: The SW-10 is a passive subwoofer and requires an external amplifier to power it. It is designed to integrate well with active stereo speakers and home theater systems. Check your amplifier's specifications for power output and connection options.
Care: To clean the subwoofer, disconnect it from power and wipe the exterior with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents. Ensure ventilation grilles are kept clear of dust and obstructions.