Fast Mover 2K Plastic Repair Rigid Glue - 50ml - FMT6340/KIT
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Fast Mover 2K Plastic Repair Rigid Glue is an essential tool for automotive technicians and DIY enthusiasts who need a reliable, professional-grade adhesive for structural repairs on semi-rigid plastics. This fast-curing, 2-part polyurethane system offers exceptional bond strength and durability, though users should note that the fast setup time requires careful planning and quick execution during application.
All features
| Model Part Number | FMT6340/KIT |
|---|---|
| Brand | Fast Mover |
Extended Product Information
FAQs
Does this kit come with a dispensing gun?
No, the kit includes the 50ml cartridge and 10 nozzles, but the dispensing applicator gun must be purchased separately.
Can I use this on all types of plastic?
This product is formulated specifically for semi-rigid plastics. It may not adhere well to low-surface-energy plastics like polyethylene or polypropylene.
How long does it take to cure?
The adhesive is a fast-curing formula. While it sets quickly, we recommend leaving the repair undisturbed for the full cure time indicated on the packaging before handling.
How should I store the leftover glue?
Store the cartridge in a cool, dry place. Leaving the used nozzle on can help seal the cartridge, but it is often better to remove the nozzle, clean the face, and re-cap.
Is this glue paintable?
Yes, once fully cured, the adhesive can be sanded and painted to match the surrounding plastic surface.
Troubleshooting
Adhesive is not coming out evenly
Check that the applicator gun plungers are level and verify that the cartridge isn't clogged at the tip before attaching a fresh nozzle.
Bond is not holding after curing
Ensure the plastic surface was properly sanded to increase surface area and thoroughly degreased prior to application.
Glue cured inside the nozzle
Always replace the nozzle if the glue has set inside; never try to clear and reuse a cured nozzle as this will disrupt the mixing ratio.
Pros and Cons
Pros
- High structural bond strength
- Ideal for semi-rigid plastic applications
- Quick curing for faster repair turnaround
- Convenient kit includes ample spare nozzles
- Professional-grade polyurethane chemistry
Cons
- Fast cure time leaves little room for error
- Requires a specific dispensing gun (not included)
- Limited to semi-rigid plastic surfaces
Setup, Compatibility & Care
To use the FMT6340/KIT, you will need a standard 50ml dual-cartridge applicator gun. Begin by removing the cap from the cartridge and purging a small amount of product to ensure both sides are flowing evenly. Attach one of the included mixing nozzles by locking it into place. Apply the adhesive to clean, scuffed surfaces to maximize adhesion. After use, either leave the nozzle on the cartridge to act as a cap or remove it and wipe the cartridge openings clean before re-capping. Store the cartridge in a cool, dry place to maintain the shelf life of the polyurethane components.