Kitchen Cabinet - Kitchen Kit - Shaker Matt Cashmere - Double Extractor Wall - 800mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Kitchen Kit Shaker Matt Cashmere Double Extractor Wall Cabinet is designed for homeowners looking to efficiently assemble a stylish and functional kitchen. Its key benefit is the rapid, glue-and-click assembly system, significantly reducing build time. A minor caveat is that precise alignment is crucial during the initial glue application for optimal rigidity. This cabinet features a durable MFC construction with FIRA Gold certified doors and cabinets, integrated soft-close hinges, and adjustable legs for base units (though this is a wall unit).
All features
| Brand | Kitchen Kit |
|---|
Extended Product Information
FAQs
How long does the assembly typically take?
With the glue and click system, basic cabinet assembly can take as little as 30 seconds, not including adhesive curing time.
What is the service void size for this wall unit?
This wall unit features an 18mm rear service void for concealing necessary pipes and wiring.
Can the door be opened from either side?
Yes, the doors can be hinged on either the left or right side to suit your kitchen configuration.
What type of adhesive should I use?
The product usually comes with the specific adhesive required, or instructions will specify the type needed. Follow the included guide precisely.
Are wall fixings included for mounting?
Mounting brackets are included for installation, but appropriate wall fixings (screws, wall plugs) suitable for your wall type are not typically included and must be sourced separately.
How do I clean the Matt Cashmere finish?
Wipe clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals to maintain the finish.
Is this cabinet suitable for holding heavy items?
The 18mm MFC cabinet with an 8mm back provides good rigidity. However, ensure it is securely mounted to the wall, and be mindful of weight distribution, especially for wall units.
Troubleshooting
Cabinet does not feel rigid after assembly
Ensure adhesive was applied evenly and generously to all joining surfaces. Confirm pieces were pressed together firmly and held until the initial bond set. Allow the adhesive to cure for the full recommended time.
Door is not aligned or closes unevenly
Check that the hinges are correctly installed on both the door and the cabinet. Adjust the hinge screws to fine-tune the door alignment. Ensure the cabinet itself is mounted level on the wall.
Soft-close mechanism not working effectively
Verify that the hinges are correctly fitted and not obstructed. Ensure the door is not excessively heavy for the hinges or binding against the cabinet frame. Check if any packing material is still present within the hinge mechanism.
Difficulty fitting wiring or pipes into the service void
Plan your cable or pipe routing before final assembly if possible. Use the void strategically, and consider conduit or trunking if a large amount of wiring needs to be concealed.
Pros and Cons
Pros
- Extremely fast assembly time due to the unique glue-and-click system.
- High-quality, durable materials with FIRA Gold certification.
- Integrated soft-close hinges add a premium feel and reduce noise.
- Versatile design allows for left or right-hand door configuration.
- The Shaker style in Matt Cashmere is both timeless and contemporary.
Cons
- Requires careful application of glue during assembly for maximum strength.
- This guide focuses on a wall unit; base units have different leg features not applicable here.
- Limited service void on wall units (18mm) may be restrictive for extensive wiring or plumbing.
- Assembly requires basic tools and a clear workspace.
Setup, Compatibility & Care Instructions
Setup:
- Unpack all components carefully, ensuring all parts are present.
- Lay out the cabinet pieces on a clean, flat surface.
- Apply the provided adhesive to the designated joining edges as per the included instructions.
- Press the pieces together firmly, ensuring a snug fit. Hold for a few moments to allow the glue to bond.
- Allow the adhesive to cure fully according to the manufacturer's drying time recommendations before proceeding.
- Attach the door hinges to the door and cabinet ensuring correct alignment.
- Mount the cabinet to the wall using appropriate wall fixings (not included) and the provided mounting brackets, ensuring it is flush and secure.
Compatibility:
- This cabinet is designed to integrate with other Kitchen Kit Shaker range units and accessories.
- Handle compatibility will depend on standard cabinet drilling patterns; check measurements if using non-Kitchen Kit handles.
- Ensure wall type is suitable for secure mounting of kitchen wall cabinets.
Care:
- Clean the cabinet surfaces with a soft, damp cloth.
- Avoid using abrasive cleaners or solvents, as they can damage the Ultra Matt finish.
- Wipe up spills immediately to prevent staining.
- Periodically check hinge and mounting bracket tightness.