Starrett 565 Series Parallel Pin Punch - 1.5mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Starrett 565 Series Parallel Pin Punch is designed for machinists, mechanics, and metalworkers who require absolute precision when driving out pins or rivets. Its primary benefit is the combination of hardened durability and refined control, though users should note that as a 1.5mm precision tool, it requires careful alignment to prevent bending or tip breakage during heavy-duty impact tasks.
All features
| Model Part Number | 565 |
|---|---|
| Brand | Starrett |
Extended Product Information
FAQs
Can I use this punch on hardened steel pins?
While the punch is hardened, it is best practice to use it on softer pin materials; avoid using it on high-hardness alloy pins to prevent damage to the tool tip.
What is the primary material of this punch?
The Starrett 565 is manufactured from high-quality tool steel that is hardened and tempered for maximum durability.
Does the 1.5mm diameter remain consistent along the shaft?
Yes, as a parallel pin punch, the diameter is designed to be consistent at the tip to prevent the hole from being enlarged during the pin extraction process.
How should I clean the punch?
Wipe with a clean cloth and apply a light coat of rust-preventative oil before storing in a dry environment.
Is this tool suitable for heavy-duty striking?
Due to the small 1.5mm diameter, this tool is intended for precision work rather than heavy-duty demolition or oversized bolt removal.
Troubleshooting
Tip of the punch is bending during use
Ensure you are using the correct size punch for the pin and that the tool is being struck squarely on-axis.
Punch slips off the pin during striking
Check that the knurled grip is clean and dry; a secure grip is necessary to maintain stability during impact.
Pros and Cons
Pros
- Excellent build quality and durability
- Knurled surface provides superior grip and control
- Perfect for fine, small-diameter pin applications
- Consistent hardening ensures a long service life
Cons
- Small 1.5mm tip is susceptible to damage if struck off-center
- Not intended for heavy-duty automotive frame work
- Requires precise alignment to prevent bending
Setup, Compatibility & Care
Proper use of this tool begins with a clean workspace and a solid anvil or bench block to support the workpiece. Ensure the workpiece is adequately supported so that the pin has a clear path to exit. To maintain the tool, wipe the shaft down with a light machine oil after use to prevent corrosion. Store the punch in a dedicated tool roll or rack to protect the tip from contact with other hardened steel tools, which can chip or dull the edge. Avoid using this punch as a pry bar, as the hardened alloy is optimized for compression forces along the axis rather than lateral stress.