Frenchic Lady Grey Trim Paint - Grey
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Lady Grey Trim Paint is designed for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and more with a sophisticated, deep grey finish. Its key benefit is the all-in-one nature, requiring no primer or top coat, significantly simplifying the painting process. A potential caveat is that the soft-satin sheen may not be suitable for high-traffic areas requiring an ultra-durable, matte finish. This water-based chalk and mineral paint offers a timeless, elegant grey, boasting a self-priming, self-sealing, and robust, scuff-resistant finish that is also low VOC and low odour.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 40319916507223 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to prime or use a top coat with this paint?
No, Frenchic Lady Grey Trim Paint is a self-priming and self-sealing formula, meaning no separate primer or top coat is required for most applications.
What surfaces can I use Frenchic Lady Grey Trim Paint on?
It is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and furniture including kitchen cupboards and built-in furniture (wood and laminate). It is also safe for children's toys.
How much area does a 500ml tin cover?
A 500ml tin covers up to 7m² with a single coat. For a more durable finish, two coats are recommended, meaning one tin covers approximately 3.5m².
Is this paint suitable for outdoor use?
This paint is specifically formulated for interior use only.
How do I clean my brushes after using this paint?
Clean your brushes, rollers, and any spills immediately after use with soap and water.
What is the finish of this paint?
The paint has a soft-satin sheen.
Is the paint safe for use on children's furniture or toys?
Yes, it is EN71-3 certified, making it safe for use on children's toys.
Troubleshooting
Paint not adhering well
Ensure the surface is properly cleaned and free from dust or grease. For very glossy surfaces, a light sanding may be necessary before application.
Uneven finish or brush marks visible
Apply paint in thin, even coats. Avoid overworking the paint. Ensure you are using a good quality brush or roller suitable for water-based paints. Allow adequate drying time between coats.
Paint seems too thick
Stir the paint thoroughly. If still very thick, a very small amount of water can be added (test on a small area first) but this may affect the finish.
Surface feels tacky after drying
This can indicate insufficient drying time or humidity. Ensure adequate ventilation and allow more time for the paint to cure fully. Avoid applying further coats until the surface is no longer tacky.
Pros and Cons
Pros
- Eliminates the need for separate primers and top coats, saving time and effort.
- Provides a durable, scuff-resistant finish suitable for various surfaces.
- Water-based formulation makes cleanup easy and reduces odour.
- Certified safe for children's toys, expanding its application range.
- Offers a sophisticated and deep grey aesthetic.
Cons
- The soft-satin finish might not be preferred for areas demanding a matte look.
- Coverage estimates are based on two coats, meaning a single tin covers less area than initially suggested for one coat.
- May require more extensive surface preparation on very glossy or problematic surfaces compared to traditional paints.
Setup, Compatibility & Care
Setup: Ensure the surface is clean, dry, and free from grease or dust. Lightly abrading very glossy surfaces can improve adhesion. Stir the paint thoroughly before use.
Compatibility: Suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and various furniture types including wood and laminate. Also safe for children's toys.
Care: Apply two thin coats for optimal durability, allowing adequate drying time between coats. Clean brushes, rollers, and spills immediately with water. The finish is robust once fully cured.