Warren Reed Designer Highland Cow and a Cottage Bathroom Splashback - 25 x 60cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed Designer Splashback is for homeowners looking to add a touch of elegance and practicality to their bathrooms. Its key benefit is providing a beautiful, hygienic, and low-maintenance surface that replaces traditional tiles. A potential caveat is its specific size and design, which may not suit all bathroom layouts or aesthetic preferences. This splashback is crafted from 6mm toughened glass with a high-quality print, offering resistance to moisture, mould, stains, and water. It's designed for easy installation without drilling and requires minimal cleaning.
All features
| Model Part Number | WR01263-P464 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is made from 6mm toughened safety glass with a high-quality print.
Do I need to drill holes to install this splashback?
No, the splashback is designed for a drill-free installation. It is typically adhered to the wall using a strong adhesive.
How do I clean the splashback?
You can clean it easily with a soft cloth and warm, soapy water. Avoid abrasive cleaners.
Is this splashback suitable for areas other than bathrooms?
While designed for bathrooms due to its moisture resistance, it could potentially be used in other areas where a decorative, easy-clean surface is desired, provided the environment is not excessively humid or prone to high impacts.
What are the exact dimensions of the splashback?
The dimensions are 600mm in width and 250mm in height (60cm x 25cm).
Does the splashback come with adhesive?
No, adhesive is not included with the splashback. You will need to purchase a suitable strong adhesive for glass surfaces separately.
How durable is the printed design?
The print is high-quality and designed to be durable for bathroom conditions. However, it should be cleaned gently to maintain its finish.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface is clean, dry, and free from dust or grease. Verify that the correct type and amount of adhesive for glass splashbacks have been used and applied according to instructions. Allow adequate curing time.
Visible adhesive marks or bubbles
This can occur if adhesive was applied unevenly or if air was trapped during installation. For best results, professional application may be considered. Minor imperfections may be unavoidable with DIY fitting.
Scratches on the glass surface
Avoid using abrasive cleaning materials. If minor scratches occur, they may be subtle depending on lighting. For significant damage, replacement might be necessary.
Water seeping behind the splashback
Ensure a complete seal around the edges using the adhesive. Check installation instructions for sealing recommendations, if any. Promptly wipe away any standing water.
Pros and Cons
Pros
- Provides a seamless and grout-free finish for easier cleaning.
- Highly resistant to moisture, mould, and stains common in bathrooms.
- Simple, drill-free installation process saves time and effort.
- Durable construction with 6mm toughened safety glass.
- Adds a unique designer element and visual focal point to the bathroom.
Cons
- Fixed size (25 x 60cm) may not fit all basin areas.
- Design is specific (Highland Cow and Cottage) and may not match all decor styles.
- Requires a smooth, clean wall surface for proper adhesion.
- Glass material can be heavy, requiring careful handling during installation.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the wall area behind the basin is clean, dry, and smooth. Remove any existing fixtures or imperfections.
- Read the included installation instructions carefully before proceeding.
- Apply a suitable strong adhesive (sold separately) to the back of the splashback or directly onto the wall as per the adhesive manufacturer's instructions.
- Carefully position the splashback onto the wall, ensuring it is straight and properly aligned.
- Apply gentle, even pressure to secure the splashback. Allow the adhesive to cure fully according to its instructions before use.
Compatibility:
- This splashback is designed for use behind bathroom basins.
- It is best suited for walls that are flat and structurally sound.
- Ensure the size (W600mm x H250mm) fits your intended installation area.
Care:
- Clean the glass surface regularly using a soft cloth dampened with warm, soapy water.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the printed surface.
- Rinse with clean water and dry with a lint-free cloth to prevent water spots.