Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone needing to reattach a rear view mirror or other glass-to-metal components using Loctite Rear View Mirror Bonder. The primary benefit is a permanent, strong bond that resists UV, moisture, and chemicals, ensuring long-lasting adhesion. However, this product is only suitable for glass and metal surfaces. This guide provides step-by-step instructions and helpful tips for successful application.
| Model Part Number | 194088 |
|---|---|
| Brand | Loctite |
Loctite Rear View Mirror Bonder is designed for use on glass and metal surfaces only.
The adhesive typically sets in a few minutes, but allow for full curing as per the instructions.
Yes, the bond created by Loctite Rear View Mirror Bonder is designed to be permanent.
The adhesive performs best at room temperature, however, it is designed to withstand the range of temperatures typically found in a vehicle.
Re-clean both surfaces, apply fresh adhesive, and ensure proper alignment and sufficient curing time.
While it is excellent for rearview mirrors, it can also be used for other glass-to-metal applications like phone and radio aerials.
The kit contains a tube of adhesive and an activator mesh.
Store the adhesive in a cool, dry place, away from direct sunlight and extreme temperatures.
Ensure surfaces were properly cleaned and prepared. Reapply the adhesive, following the instructions carefully. Check the expiry date of the adhesive.
Make sure the correct amount of adhesive was applied. Confirm the surfaces were compatible and not damaged. Allow for sufficient curing time before testing the bond.
Ensure the adhesive is fresh. If the temperature is too low, move to a warmer environment. Ensure you used the activator mesh
Compatibility: This adhesive is only compatible with glass and metal surfaces. Ensure both surfaces are clean and free of contaminants for optimal bonding.
Care: Avoid exposing the bonded area to extreme temperatures or moisture during the initial curing period. Once cured, the bond is durable and resistant to most conditions.
