Carlube Molybdenum 2 Multi Purpose Moly Grease Protection Lubricant 500g - XMM500
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Carlube Molybdenum 2 Grease (XMM500) is a high-performance lithium-based grease designed for automotive and industrial applications requiring superior anti-wear protection. It's ideal for components subjected to high loads and limited movement, such as CV joints and wheel bearings. While offering excellent resistance to water and oxidation, a potential limitation is its specific application focus, meaning it might not be the best choice for very high-speed applications without further consideration.
All features
| Model Part Number | XMM500 |
|---|---|
| Brand | Carlube |
Extended Product Information
FAQs
What is Molybdenum Disulfide (Moly) in grease?
Molybdenum Disulfide is an additive that acts as an extreme pressure (EP) agent. It forms a low-friction, wear-resistant film on metal surfaces, providing excellent protection under high loads and boundary lubrication conditions.
Is Carlube Molybdenum 2 Grease suitable for all wheel bearings?
It is suitable for wheel bearings where recommended and particularly beneficial for those subjected to high loads. Always consult your vehicle's service manual to confirm the recommended grease type for your specific wheel bearings.
Can I mix this grease with other types of grease?
It is generally recommended to avoid mixing different types of greases. If you need to top up or replace grease, it's best to clean out the old grease completely before applying the Carlube Molybdenum 2 Grease to ensure optimal performance and compatibility.
What is the operating temperature range for this grease?
This grease offers effective performance across a wide temperature range due to its high melting point lithium base. Specific temperature limits should be referenced from the product's technical data sheet, but it is designed for demanding conditions.
How often should I re-grease components?
Re-greasing intervals depend heavily on the specific application, operating conditions, and manufacturer recommendations. Consult your equipment or vehicle service manual for the recommended lubrication schedule.
Where does Carlube Molybdenum 2 Grease excel most?
It excels in applications with high loads and limited movement, such as CV joints, universal joints, suspension joints, and plain bearings, where its anti-wear properties are most beneficial.
Troubleshooting
Grease appears too stiff in cold temperatures.
This is normal for high-melting point greases. Ensure proper application method; the grease will soften with operational heat. If consistently too stiff for application, consider a lower viscosity grease for extreme cold if specified for the application.
Water contamination observed in grease.
Ensure seals are intact and application area is protected from direct water ingress. While the grease is water-resistant, persistent exposure to high-pressure water can eventually displace it.
Component shows signs of wear despite greasing.
Verify that the correct type and amount of grease were applied and that the component is suitable for this specific grease formulation. Check for underlying mechanical issues or if the lubrication interval has been exceeded.
Pros and Cons
Pros
- Superior anti-wear properties due to Molybdenum Disulfide.
- Resists water washout and oxidation for extended lubrication.
- Effective across a wide operating temperature range.
- Ideal for high-load, low-speed applications.
- Protects against acidic contaminants.
Cons
- Primarily designed for high load, limited movement applications; may not be optimal for high-speed scenarios.
- Requires proper application method to ensure full benefit.
- Specific compatibility checks needed for all bearing types.
Setup, Compatibility & Care Instructions
Setup:
- Clean the Area: Ensure the component to be greased is clean and free from old grease, dirt, and debris.
- Apply Evenly: Apply the grease evenly to the surfaces requiring lubrication using a grease gun or spatula. Avoid over-application, which can lead to overheating.
Compatibility:
- Generally compatible with most lithium-based greases. However, avoid mixing with different grease types without consulting manufacturer recommendations.
- Suitable for steel, cast iron, bronze, and other common bearing materials.
- Recommended for applications such as CV joints, universal joints, suspension joints, plain bearings, and wheel bearings (where specified).
Care:
- Store the grease in its original container in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the container lid tightly closed when not in use to prevent contamination.
- Periodically inspect lubricated components for signs of wear or contamination, and re-grease as per manufacturer service intervals.