Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Liberon Black Bison Wax Paste for Medium Oak (1kg) is designed for anyone looking to nourish, protect, and enhance the natural beauty of their wooden furniture and surfaces. Its key benefit is providing a durable, lustrous finish that resists fingerprints and water marks. A potential caveat is its specific suitability for interior use and particular wood finishes. This premium wood care solution offers a superior blend of waxes, including carnauba, to feed and polish wood, preventing dryness and covering minor imperfections.
| Model Part Number | 126885 |
|---|---|
| Brand | Liberon |
Liberon Black Bison Wax Paste is suitable for all types of wood, providing nourishment and protection to both hard and soft woods, as well as those with existing lacquer or French polish finishes.
No, this product is specifically designed for interior use only and should not be applied to exterior wooden surfaces.
The wax requires a minimum drying time of 20 minutes before it can be buffed to a sheen.
A 1kg tin of Liberon Black Bison Wax Paste provides coverage of approximately 10-12 square meters.
Yes, the Liberon Black Bison Wax Paste is silicone-free and safe for use on children's toys.
Tools such as brushes, cloths, and steel wool should be cleaned immediately after use with White Spirit.
The wax is effective at covering minor marks and scratches, helping to disguise them and restore the wood's appearance. For very deep gouges, repairs may be needed before waxing.
This usually means too much wax was applied or it was not allowed to dry sufficiently. Apply a very thin layer of White Spirit to a cloth and wipe the surface to remove excess wax, then buff thoroughly once dry.
Ensure the wax was applied thinly and evenly. Buff the entire surface with a clean, soft cloth to blend out any streaks. If the problem persists, you may need to apply another thin coat after buffing.
Verify that the wood surface is properly prepared and free from old finishes, wax, or sealants. For very dense wood, a second thin application after buffing the first may be necessary.
Ensure the wax has dried completely for at least 20 minutes. Buff vigorously with a clean, soft cloth or a lambswool buffing pad. For a higher sheen, a final buff with a clean silk cloth can be used.
Setup:
This product requires no setup beyond opening the tin. Ensure the wooden surface is clean, dry, and free from dust, grease, and old, flaky finishes before application. If removing old finishes, use an appropriate Liberon wood stripper and follow its instructions.
Compatibility:
Liberon Black Bison Wax Paste is suitable for all types of wood, including those finished with lacquers and French polishes. It can be used on new wood to enhance its natural beauty or on older wood to restore and protect. It is safe for use on wooden toys. It is designed for *interior use only*.
Care:
